Bie

You hang it all on your neck?

Nagra VI doesn't like Mac.

Could Fusion indicate (in the screen) when does the limiter work?

Soon Iphone5: 8 tracks with TC

My ear says that the Audio Developments is better than Cooper. Bié

Hi, Jeff, My new name: Bié (Bié = Gabriel) Bié

Glenn, Thanks for continuing this discussion. About direct contact with the Zaxcom, I, before posting here, sent messages to the support and directly to Collen, without any reply. Tks, Gabriel

These differences are not equal on all machines, is random, which makes it harder to solve the problem of all units with a single firmware. Gabriel

In my Fusion, with the fader set to "0", to align the signal on the display, between inputs 3 and 6 (if the trim is true) there is a difference of 15dB. Gabriel

Since 1967 with sound, I never saw a difference greater than 0.5dB. Gabriel

Billy's logic is good for Zaxcom, for me, not!

Billy, Your Deva also has the same problem and you solved this way? Gabriel

The problem of Gabi's F12 is the same of my F10. Sees the pictures: To solve this problem, I intend to change the pots and the photocell gain control Gabriel

Glenn, I have 744T, 702T, 788T, Tascam HD-P2, Tascam HS-P82, Zoom H4N, Nagra LB and Nagra VI. In none of these machine exists larger difference than 1dB among the inputs! Ok Fusion with difference of 3dB, but 10dB.... If you can send me the schematic, I make the necessary corrections here in Brazil, without problem. I know as correcting these differences. If you can send for me pots and fotocelulas selected, my extra expense it will be smaller. Thank you, Gabriel

I am disappointed with Zaxcom. Cannot the machine be calibrated before leaving the factory? Several units in the same conditions. That is headache to the user! Gabriel

Thank you for your answer, Glenn! For me, to send from Brazil to Zaxcom, it is very risky and expensive. Can you send instructions for resolved here in Brazil by my trust technician? I can lose the warranty without problem. Tks, Gabriel

Glenn, The problem of my Fusion 10 is identical to this of the Gabi. With a Neutrik Minitaror MR1 in 0dB/1KHZ > line and -40 > mic, directly and each input of Fusion (checking in line and also mic - same result), Fader and Trim of Fusion in the position 0. I suspect of the pots of Fader. Some idea? Thank you, Gabriel

Hi, Glen, Please, can you talk about the gain differences (up to 10dB) among the 8 inputs of Fusion 10/12? Is it possible to solve w/ firmware? Serial of my Fusion: 20166 Tks, Gabriel

Hi, Jonny, Please, cam Red run 24, the tc of the syncbox connected to Red is 24 or 30? Thanks, Gabriel