Sync Sound

A little MKH-416 follow up… RF choke inductors are 39µH not 22µH. Also, the microphone has a 2mA nominal current consumption.

I sometimes love to use Lectrosonics SRb's with a couple SMv, SMQv, or HM transmitters.

Thanks for your recommendation soundtrane, I plan to use the 190mA inductors if I can't obtain the specifications on that part. I emailed Sennheiser's service support today for an answer from a repair technician, I'll follow up with their response.

Does anyone know the IDC (mA) Maximum current rating specification for the two 22µH 3.3Ω axial RF choke inductors on a Sennheiser MKH-416? The RF chokes connect the XLR plug-body to the PCB. I believe they are rated at either 144mA or 190mA, can anyone positively confirm which maximum current rating is specified? I am repairing the loose XLR-M pins, stabilizing RF coil cores & replacing the RF chokes too. (Not sure if I should have posted this in the http://jwsoundgroup.net/index.php?/topic/28183-repair-mkh-416-p48/ "Repair MKH 416 P48" string... It all started with loose XLR pins) Thanks for any help!