Hey all,
I posted this on the Lectro Facebook group, but I'm hoping someone here might be able to shed some light as well.
I'm having a really strange issue with my SRa receiver that I can't seem to figure out.
I have an SRa on the latest firmware along with two SMDa's. I noticed lately that one channel is WAY louder than the other but I was on set and didn't have much time to troubleshoot. When I got home I took my time and this is what I'm seeing.
Channel 2 is consistantly and significantly louder than channel 1.
The levels for both channels on the SRa are both set to +5.
I tried swapping the mics - no difference
I tried changing the inputs on my recorder - no difference
I checked that the TX and the RX were set at the same level - no difference, didn't matter which TX I used
Checked compatibility modes - no difference
Checked Pilot tone was active - no difference
Phase both set to +
Swapped cables - no difference
Essentially no matter what I do, anything I output from Ch 2 is about 20-30db louder than Ch 1. All I need to do is swap the cable from Ch 1 to Ch2, set the Freq and bam, it starts peaking like crazy. I've tried every possible combination and to rule out cables, mics, recorder settings etc. Any thoughts?