Jump to content

nevo

Members
  • Posts

    266
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by nevo

  1. There was a thread where SD Were talking about it but I can’t find it…. I’ve sent SD a message.
  2. My icon platform has died and I’m looking for a replacement. I remember someone talking about the V1 pro and it might be useable as a controller in the near future….. I can’t find the thread now and was wondering if it was a possibility or whether those plans were dead… what else is there?…. The platform fits perfectly in my rastorder cart ….. The waves fit will fit within the frame by 5 mil After last years strikes i don’t have funds for a cl16 . Any other contenders?
  3. It was the USB cable which worked for other purposes but not the MIXPRE . New cable and ASIO drivers working.
  4. The only USB function under system i can see is Normal or stereo out...... The Mixpre 10 can not be powered by USB
  5. hello hive mind. Im setting up a small laptop DAW with REAPER and was thinking about using my MixPre 10-2. When I plug into the Mixpre USB C port from my USB A on my computer The mixpre doesnt show up even as a 2x2 device in windows. Im running the mixpre from a 240-12v . I have downloaded the ASIO mixpre driver but the mixpre which is windows compliant ? shhould show up as 2x2. I can go back to running my yamaha micpre box via ADAT into my ferro fish and going into ethernet but was trying to make a tiny rig. Any thoughts thanks Ant
  6. Hi Doug Have you found using a small switch reliable as a Cat5/6 cable extender?…How much cable are you running?
  7. nevo

    Cedar Scorpio

    There’s 2 pages of “more“ You have to toggle 2x to get to the CEDAR. Thanks Rich I may never have found that.
  8. nevo

    Cedar Scorpio

    I purchased the cedar SDNX and have been using it with a processed and unprocessed track double I usually only use 1-2 dB of reduction , which I select on each channel. i want to put it on a buss for IFB and can’t figure how to select amount..... Any clues ...I’ve gone to buss output masters but there is no amount selection
  9. yes you are correct. I just set my system up but then have gone onto a drama. and didnt feel confident enough to incorporate it quite yet. I finish in 3 weeks and will then be hitting it hard trying to see how stable it is and fixing it if it breaks ,but from everyones experiance once you get it solid it works a treat. It took me half a day with a friend who works in the theatre and has been using Dante for a few years and a call to a network engineer to configure everything and once it was working it all seemed to work well. Thanks to all the people who gave me advice. ill post photos etc in a month once ive spent some time with it. On this job im on it would have been useful on so many occasions. Nevo
  10. I’ve been doing both for 30 years and concur with most of what is written above. The only downside I experienced is being onset on another job and producer rings to say last minute changes on the mix and we need it now......So juggling the two can be hard if you are busy with both. I did many years mixing the documentaries and composing for the shoots I did location on. Its very fulfilling to go from acquisition to output......( and you can’t blame anyone if it sounds sh#t)
  11. thanks I ended up with the Silex ds510
  12. Hi Karl what usb to network adapter do you use?..Im wanting 2x usb to ethernet and the only one ive been reccomended is theThe silex ds510? I would have to import it.
  13. Thanks to everyone for their advice.....I have all the bits...now let the fun begin.
  14. Thanks yep gone thru the audinate L1,L2 vids and read the Yamaha document.... waiting for a couple of bits to arrive and then I’ll build it and see if it works....
  15. Hi Douglas Im about to do my wireless Dante build With lectro venues and Scorpio Are you using the Cisco sg300-10 12v non Poe switch? if so what parameters did you need to configure? Or did it work ok out of the box
  16. nevo

    Antenna combiner

    Ive got a dc powered Sennheiser unit to try.Ill do some tests and post some real world results. If I was to be on a shoot that constantly needed zones ,id probably rent one in. regards Ant
  17. What are people using for combining Antennas for multi zone use? My use would be for the very odd occasion like I had last week with 3 cameras and a long walk n talk with 100 extras vehicles crane etc . If I could have put another set of antennas along the way would have been useful. Im thinking DC powered with a small footprint The one I’ve seen is the Wisycom CSA221 Which has 4 db of loss . Are there any other manufacturers who make combiners at a reasonable price..... I don’t really need a active combiner 3k unit ...
  18. Yes “Ludicrous” that you’re had that many break on your show . I guess that’s what loss and damage reports are for. I’m down 6 sets of headphones and a SNa600 but no Lavs ....fingers crossed
  19. It’s a drag when they go.....They aren’t cheap..... Ive sent a few back to manufacturers and most times they have given me a new one at a discounted price.
  20. I’ve been using COS11 for many years and never had one break maybe I’m just lucky? Ive had B6s go bad and a couple of 4061s go but never a Sanken
  21. Hi Rob Using the Dante with the NDI and wireless designer control ,Are you using Multicast flows? Did you try this combined traffic on a unmanaged switch? Nevo Are you letting Dante select your clock master or using Preferred master/external sync?
  22. Hi again Do you use you remote patchbay for playback patching from a laptop? And control of VOG remotely? And antennas of course.
  23. Do you have any photos of your Dante cart? Your replies have been super helpful.
  24. Sounds exact same setup as me....what are you using to convert your Scorpio X Outputs into Dante? Do you use a USB to TCIP for remote control of Wireless designer
×
×
  • Create New...