Hi,
Recently worked with the f3, and the timecode would not sync to the 744t at 23.976, the camera recording framerate. (flashing tc on 744t display) Checked the camera settings, and the sdi output is set to 59.94. Switch that to 23.976, and it syncs no problem. (solid tc on 744t display) The interesting thing is I wasn't plugged into the sdi, but into the tc out. So the tc out is linked to the sdi out setting, not the internal recording setting.
Also the Zacuto viewfinder the Dp uses cannot process that the 23.976 framerate of course, and loses signal. So, I jam, disconnect tc, and reset the camera tc out to 59.94. Back in Business.
My question is, what happens if I just sync to the 59.94 tc? I'm still recording in 23.976 on the 744t. Will I be in sync? Obviously it's a bit of a cheat, since the 744t and the zacuto both react to the tc difference. If there was a huge discrepancy, that would be problematic for syncing footage captured in camera to footage recorded externally. If i am jamming to a single frame, will the numbers be so close that it will make no perceivable difference?
Also, at the most basic level, this complicates/lengthens the simple task of jamming. Is it another case of "More complications? What else is new!?!" Throwing it out to all of you in the hopes that I learn something!
Thanks. Wish everyone a prosperous 2012.
-g