postaudio

Great! Thanks everyone for their input!

Hi what kind of cables would you recommend for making 4pin XLR to lectro or hirose? Remote audio uses 14awg and 16 awg I think. Do you have a link or website to recommend? Thanks

Hi, Does anyone has wiring diagram for Beyerdynamic MCE 10 for lectrosonics? The one I got is wiring to a 4 pin. 3 wires, Red and White is soldered together and a ground. Anyone has any idea? Thanks. Ben

Good to know. Thanks Philip

Hi, Is it possible to get a 12V AC power supply and change the connector to hirose and power up the 633/ 664? Based on the diagram, only pin 1 and 4 is used. Shouldn't be too difficult? Anything I should watch out for? Thanks. Ben

Just trying to see if I can get more range of a SMQV in IFB mode.

Can I use the PSC Multi sma to boost smqv used as an IFB? I'm having trouble getting it to work. Smqv into RF multi sma to ALP620. Thanks. Ben

Can I use the PSC Multi sma to boost smqv used as an IFB? I'm having trouble getting it to work. Smqv into RF multi sma to ALP620. Thanks. Ben

Can I use the PSC Multi sma to boost smqv used as an IFB? I'm having trouble getting it to work. Smqv into RF multi sma to ALP620. Thanks. Ben

anyone wants to make a BDS to hirose cable and I'll buy it from you?

I believed we shot at 29.97 and I had one on on Lockit box and one jammed once start of day and one after lunch and it was in synced.

TC only. BNC to TC in. All 3 cameras did not drift at the end of the day.

I tested the Tig for a couple of months and it works great. I tested on Red, C300s, and F55. Sync is solid and did not drift. I have 2 SB3 and I definitely like the fact that Tig is 1. Small and compact 2. On off switch easy accessible without having to pull off the battery plate and hold the button to turn off the unit. 3. Solid sync 4. Pricing 5. Variable output 6. 2 AAA lasts more than a 12 hour day

great! Thanks!

Hi, Is it possible to wire the NP1 Cup pig tail directly to 8 lectros power plug in order to power 8 - 411a at once? That way I don't need the BDS power distribution center, just directly powering the lectros. Doable? Don't know if it needs resistors between the battery and the 411a? Advise? Idea? Thanks, Ben

Thanks Jason. Will call tomorrow. Well it's so much easier to email when on set.

YES! Thank you!!!! I searched everywhere but it didn't show up. Awesome!!!!

Anyone knows the part number of the quick release clip from the harness to the petrol bag? The one that strips around the waist. Production company rented gear from pro sound but I used my own harness. I left the clip on there and returned the rental gear. Emailed pro sound but never heard back. I guess I'll have to go buy a replacement. Any info appreciated. Thanks.

I'm having trouble with Extreme Pro 64GB SD XC card. I cannot get my Macbook pro 10.6.8 to read the card. It's my backup card on the SD664. I'm using a Delkin card reader and it says that it reads XC card. Any idea? I'll pass my card to DIT and see if they can download for me but I like to save my backup. Anyone has trouble getting Macbook Pro 10.6.8 with the ExtremePro 64GB SD card and a Delkin card reader? Thanks. Ben

Thanks guys!!

There's no trim, only fader on the CL-6. Is that right? Maybe I'm overlooking something. Sorry, I meant to say 411a is at +5, which is the max. I don't want to crank the SMQV.

The trim doesn't seem to affect the iso track, it will bring it up to X1/X2, and LR. Also, it's +15, yea? Don't think it's +22?

Hi, I'm getting realtively low ISO input level from 411a out into the CL6. My output level on 411a is at +5, I guess I can crank the Tx level but I don't really want to do that. Is anyone having that problem or is it just me? Or is there something I am not doing right? Thanks.

I see. Let me give that a try. Thanks John.

Hi, I'm trying a few things but can't seem to get this cable to work. I want to make a timecode cable out from comtek PR72b to BNC into camera. I have a mono 1/8 wired to BNC. I put a 2.2K resistor on positive. I tested it and it turned the comtek on and it was feeding timecode into a 744T. After a few minutes, it stopped working??? I tried everything, adjusting the volume etc... no luck. I may have busted the comtek? I can still hear "timecode" when I plugged a headset into the 72b. I just can't seem to get the cable working again.... Any idea? Thanks. Ben