piero

Glenn said "Zaxcom ifb and Zaxnet can be added with a TRXCL camera link directly connected to the RX8 with Dante." I'm interested to know if Zaxnet can also be added with a QRXifb or a IFB200.

Hi everybody, a month ago I replaced the screen of my fusion with a new one. Two days ago after starting the recorder I notice that the backlight of the screen does not turn on. The touch works perfectly but the screen remains very dark and I can only read it by pointing a light at it.Has it ever happened to any of you?

Left it in a warm and dry environment for a day and now It seems to be working fine.

Hi, I have a IDX JL-2Plus that was plugged (charging one np battery) under the rain for several minutes, and now the amber power light is staying solid but when I place a battery into the charger the charging lights do not react. Anyone experienced something similar?Just to know if there is any chance to fix it or I should start to find a new unit... Thank you! Piero.

Yes I know the difference between bias power and RF gain, so I misunderstood the Shure specifications... Yes, I know the difference between bias power and RF gain, I think I misunderstood the Shure specifications... I understood that an amplification was necessary to compensate the loss of the "bias voltage" for longer cables, the voltage necessary to power the antenna! Anyway I can't understand why the Uabiast is able to feed the antenna through a 30 feet coaxial cable but not with a 100 feet cable. I'll check again the bnc connections. Thank for your answer!

Hi folks, I'd like to find a proper bias tee to feed a Betso Shatkie, using a 100 feet coaxial cable (an Aircell 7). I've bought a Shure Uabiast but I just realize that for cable runs exceeding 25 feet an in line amplifier may be required to compensate for signal loss...damn! I hope there is a more powerful one on the market. Maybe the lectrosonics Bias T?Unfortunately on the specifications there is no mention of the maximum cable lenght. Any suggestion? Thanks.

I'd like to add some DPA SLIM at my zaxcom LA2.6's.I'm very happy with my 4063, but there isn't a low voltage SLIM version.Which version of DPA SLIM is reccomended for Zaxcom TRXLA : 4060 (Hi sens.) or 4061 (Low sens.)?

But using a G2/G3 beltpack transmitter (mono) you have to turn off the pilot tone on your IEM300 . The stereo systems work on a different pilot-tone frequency.

Hi Gabriel, yes, at the moment I'm using two LEXAR 32GB 633x SDHC Class 10 without problems (they are not included on the recommended SD cards list but they passed the full test), and they are not too expensive.

Now everything is clear, thanks!

Hi everyone, is there any "psc triple play" user out there? I'm a little bit confused about how the 3 inputs work together. For example: what happens if I have on the input 1 an ac power supply, on the input 2 one SLA battery and on the input 3 one NP battery? By what criterion the unit chooses to feed from input 1, 2 or 3? Maybe according to the voltage of each input? Or does it simply take the power from 3 inputs at the same time? Thanks in advance !

I've just bought two cards included in the list of recommended cards on the Zoom website (kingston SD4/32GB). Running the "quick" card test in my recorder the result was positive but running the "full" test the result was negative. Has anyone else experienced the same problem with the same or another recommended card?

I received support by TEDES in Italy for replacing the FUSION's power supply board or the front panel of a TRX, but (in my experience) if a zaxcom wireless or recorder stops working or simply needs to be recalibrated it will have to be shipped to NJ. Maybe one day Zaxcom will provide FULL technical support in Europe?

Really nice work valentino! Hope to see your prototype soon. A presto!

Good to know, thanks!

Hi all, I just bought an RF MULTI SMA and I'd like to know if I can power it with a IDX NP-L7S through my PSC POWERSTAR MINI. I know that the RF MULTI SMA accepts a dc source between 10 and 15Vdc, but my NP-L7S fully charged is on 16V, or more. Powering the RF MULTI with the NP-L7S could damage it? Can I solve the problem without having to buy another battery? Thanks! Piero.

Thank you John for your exhaustive explanation. Really helpful!

Hi John, could you explain the best way to connect the cable shield to the shell?Do you have to solder or you simply lock the cable shield in the shell? Thanks!

Just finished the first day of filming:setting the output at 2V seems to work fine. Thanks to all!

Hi everyone, I'll start working on a project with RED ONE camera, and I'll send the time code to the camera with an ERX1TCD: any idea how can i set up the TIME CODE OUTPUT LEVEL on the erx1tcd? Thanks! Piero.

May I ask you which receiver system are you using and what kind of range do you typically get when the LTH is on the talent's body? Thanks!

It would be really interesting... Thanks!!!

Hello! I'm not satisfied with the range of my zaxcom wireless system (4 TRX900LT and 2 qrx100 in a soundbag, without micplexer), so I'm thinking about upgrading my TRX900LT to LTH version. Has anybody done any comparison between LT and LTH? Is there any noticiable inprovement in terms of range? Thanks! Piero.

Thanks Chris, I've contacted Zaxcom.Yes:it's an hardware problem,they have to replace the ifb board.

Thanks for your answers! Unfortunately the IFB home/extended menu now doesn't come up, so I can't see the software version installed.But I bougth the qrx in May.It would be the latest version.