Jump to content

jerryray

Members
  • Posts

    69
  • Joined

  • Last visited

Everything posted by jerryray

  1. Just a reminder we are open for repairs. Also if your spouse is a Nurse or first responder we offer discounts. Factory authorized www.lectrorepair.com
  2. John, take the top screws out remove the board from the housing, there are two connectors that connect the two boards together. Squeeze the boards and make sure that those connectors are seated firmly that's all you can do on your own.
  3. If any SRB or UCR 411 owners are in the New York area, we can do a one-day firmware update on your equipment. Authorized lectro service. please call for details. www.lectrorepair.com trying to help people, if the sysop has a problem you can delete this post. Oops, forgot to mention this will bring your firmware to a level where you can use an NU mode transmitter properly.
  4. Is this available after the webinar, missed it.?
  5. Are you running Line level out? Like 0 DBM?
  6. Wonder how they will behave once they are in a RF field, shutdown?
  7. Try Never dull And ALWAYS remove the batteries after use.
  8. Just a FYI So you lose 5.5 db for 50 feet, RG213 would be 3.3 db, 9913 would be 1.8 db
  9. Did you try a different 416?
  10. Was the mic on the transmitter? If so try a short jumper. Also check the ground screw on the 416 near the xlr.
  11. FYI, the NY Factory service can do SRB upgrades to.
  12. I did not see any booms, the set is closed in. Fishpoles could work, but I think it's all RF. At least the indise sets.
  13. Here at the lectro authorized shop in NY we are at 2 days. You cand find us from the Lectro web site
  14. Noisy preamp and or the Servo switcher ic. I usually change both. JC
  15. HI Noah, I love their little earwig communicators, they work anywhere, anytime. The writers have some imagination... Jerry from Lectrorepair.
  16. It does happen, static, phantom voltage or RTS fed to the receiver. There a 2 chips that typically go. I have repaired many with this condition.
  17. I only use dropbox for a not for profit radio group (501C3) Now I can't use it without paying. Anyone know if they allow not for profit groups to use their service at no cost?
  18. I work with a non profit amateur radio group, and we have our files on dropbox. Been using this for a year. Now they want $100 per year.
  19. Scotchguard the foam windscreens.
  20. jerryray

    Welder?

    What about a couple of corner brackets with self tapping screws, One on each side http://distributionsvimac.com/Catalogue.php?NO=V04-V021
  21. Reason for the question is I have seen the 416 mics shutdown from the HM RF. The block 19 HM with the black delron collar can shutdown a 416. 3ft cable and it's a non issue. Pehaps later shotguns have more RF bypassing.
  22. Anyone use their Lectro HM transmitters with a 416 directly plugged in? Looking to see if this is a common occurance. TIA
×
×
  • Create New...