Jump to content

karlw

Members
  • Posts

    474
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by karlw

  1. FWIW we do have several variants of the UMC16B rack multicoupler available, including one that covers the A1 and B1 bands only: https://www.lectrosonics.com/US/UMC16B-Multicoupler/product.html -Karl
  2. karlw

    Body absorption

    You can make an air gap insulator for the antenna using shrink tubing. Get a size (say, 3/8" unshrunk) that allows you to barely slip one end around the antenna down onto the connector, then shrink it at the connector so it stays in place. Then, cut the other end off just past the end of the antenna, then shrink that end and pinch it closed while hot, then trim it round.
  3. karlw

    Tumbleweeds

    Constantin and r.paterson: you guys nailed it! PM me your address and shirt size and we'll send you the latest Lectrosonics T-shirt.
  4. Tom, you nailed it! PM me your address and shirt size and we'll send you the latest T-shirt.
  5. Some of the intrepid members here have already guessed, quite accurately as it turns out, what we are announcing today: https://www.lectrosonics.com/US/DCHT-Digital-Camera-Hop-Transmitter/product.html -Karl
  6. karlw

    Tumbleweeds

    https://www.lectrosonics.com/US/phocadownload/ucr511man.pdf
  7. They've added control support (via Superslot) for the SRc-941 receiver, for their 688/SL-6 which is nice for any users with that combination of equipment, or at least considering it.
  8. The new ALP690 can be used actively or passively, and offers two filter settings, along with variable gain from -6 to +12 dB. https://www.lectrosonics.com/US/lectrosonics-releases-the-alp690-high-performance-uhf-lpda-antenna-with-built-in-rf-amplifier.html
  9. What firmware versions are in your SRc and SMWB? What happens if you select Block 21 or 22 only (i.e. not allow it to choose from the entire B1 band) with SmartTune? If you manually tune receiver to a known good (US legal) frequency, and use IR sync to set the transmitter, what happens?
  10. Hi all, For anyone interested in a 2-day, in-depth training class on wireless microphones, this class is held once a year in different locations. This time it is in Anaheim, CA, on Oct. 1 & 2. https://www.prosoundtraining.com/making-wireless-work/ -Karl
  11. Nothing to see here....
  12. No plans for an RPS8 at this time - it would likely take 2 rack spaces, not sure it would be a practical solution vs. two RPS4.
  13. The fans run at a low speed are very quiet - I can barely hear them when the unit is on and running for a while. There is no user control of the fans.
  14. We got a few batches of housings from a plating supplier that have exhibited these symptoms. We can replace the housing under warranty, if you can get your unit to one of our warranty stations or here to the factory.
  15. And I can assure you that we (a group of pro audio wireless manufacturers including Lectro, Shure, Sennheiser and AT) DID make an effort to bring about compensation for those displaced, in a pro-rated manner (the more recently you bought it, the more $$ back from proceeds of the spectrum sales). This is what they did in Japan, and also to some extent in the UK for the West End Theaters. I was at the meeting at the FCC in DC in 2014 with my industry colleagues when this question was brought up. The FCC representative's response was "You will run into significant legal challenges if you choose to pursue this". No matter than a mere 1% of the 19B spectrum sale would have funded the replacement of probably every professional wireless mic in the 600 MHz band.
  16. The cost to upgrade your SRa to SRb is $620 and involves replacement of the RF board.
  17. Hi Matthew, First off, thanks for posting these details so that we may comment and hopefully provide some enlightenment on the subject. The firmware changes have not affected mic wiring for this transmitter. If you were to load v2.10 or v2.11 firmware into a recently purchased LMb, the results (with the microphones) would be the same. Back in 2005, when we introduced the SM Series, we updated our mic wiring recommendations for two types of inputs: "servo bias only" (to work with the then new SM Series, the UM400a, later the LMa, and every subsequent bodypack transmitter introduced since then), and "compatible" wiring that would work both with the servo bias input units, and the older units (UM200a,b,c, UM400, LM, etc.) It was possible for lav mics wired for the older "legacy" transmitters (such as the M150 you mention) to work, if perhaps not ideally, with servo input transmitters due to a voltage offset spec for the op amp used at that time. In 2015, that part was changed in all Lectrosonics bodypack transmitters, and the result is that old lav mics, or any lav mics not wired to either the "compatible" or "servo bias only" standards, will no longer work very well, which is what you've experienced with your newer LMbs. So, although perhaps painful, the correct solution is to have your microphones re-wired to the 2005 standards, either: "Compatible" (will work with servo or non-servo inputs): Shield to pin 1 Bias (likely red) to pin 3 1k resistor between audio (likely white) and pin 1 Wire jumper from pin 4 to pin 2 Or "Servo bias only" wiring (generally the best audio performance with most lav mics): Shield to pin 1 Bias (likely red) to pin 3 Audio (likely white) to pin 5 Wire jumper from pin 4 to pin 2 For details on wiring for specific lav mic models, please visit https://www.lectrosonics.com/Support/Microphone-Wiring/uhf-transmitter-5-pin-input-jack-wiring.html
  18. I agree that using the same mic is the only way to evaluate any differences in sound quality between systems. Similarly, wireless range tests are only valid if the two systems are on the same frequency. This means that they have to walk each separately, which is somewhat inconvenient. As far as I know, there have never been any RF or audio differences between 100, 300 and 500 series of each generation - only features, with the higher series numbers having more options, etc.
  19. This document from APWPT (Association of Professional Wireless Production Technologies) provides a nice listing for wireless frequencies and allowed RF power levels in several countries, including France: https://www.apwpt.org/downloads/handoutfrequencies2018.pdf
  20. Brent, there is an effort to make these frequencies available in Canada but we don't yet know the outcome. Our Toronto office has been working with RABC on this issue. Keep your fingers crossed! If you are looking for details on the status, progress, etc. check with Colin Bernard - he is the point person on this.
  21. Hi Derek, Here's what the FCC says: From the FCC regulation Part 74.803 c) In the 941.500-952.000 MHz, 952.850-956.250 MHz, 956.45-959.85 MHz, … bands low power auxiliary station usage is secondary to other uses (e.g. Aural Broadcast Auxiliary, Television Broadcast Auxiliary, Cable Relay Service, Fixed Point to Point Microwave) and must not cause harmful interference. Applicants are responsible for selecting the frequency assignments that are least likely to result in mutual interference with other licensees in the same area. Applicants must consult local frequency coordination committees, where they exist, for information on frequencies available in the area. In selecting frequencies, consideration should be given to the relative location of receive points, normal transmission paths, and the nature of the contemplated operation. *** Note that it says “Applicants” are responsible for selecting frequencies. And that they must consult committees “where they exist”. In short, scan and avoid anything you see that is already there, as you normally would anyway.
  22. The SRc, SMV, SMQV, HHa and HMa are now available in the newly expanded 941-960 MHz frequency band for part 74 Licensed users in the US: https://www.lectrosonics.com/US/lectrosonics-announces-the-availability-of-select-digital-hybrid-wireless-expanded-941-960-mhz-frequency-band.html -Karl
  23. He produced the Cars albums, too - also masterpieces of engineering & production.
  24. FWIW, coming from a manufacturer's point of view, it is mainly the customers that choose which channel/s of communication they prefer. As I was coming up in this industry, there was phone, fax and email. Next was the contact page on your web site, which most often would generate an email. Newsgroups were around then, too, but have largely been replaced by social media, which is more controlled. Texting has been around for a couple of decades, too. Now there are literally dozens of channels by which customers contact, or at least attempt to contact, the manufacturers. Whether or not we "like" any particular channel, such as say Facebook, we have to realize that these channels aren't going away any time soon. I still personally view a manufacturer's web site as the primary source of public info about a company and it's products. A phone call is the most immediate way to get an answer, assuming the company answers. Email is generally expected to be answered within 24 hours unless during a weekend, trade show, or other extenuating circumstances. And social media is a huge collection of discussions, questions, inquiries, etc. that must be dealt with. All of this of course takes fairly significant resources, but like I say - it is not going away any time soon.
  25. The new 2.0 Update offers iXML Header Support, which allows for recordings to contain industry-standard iXML data in the file headers, enabling easy handling in typical editing software. And Filesystem Protection adds provisions to protect recorded data on the Micro SD card when users mount the card onto a computer. The menu structure has also been updated with some items moved to submenus, including Timecode, SD Card, and “Settings, which is designed to allow for quicker and easier navigation for users. Additional functional enhancements provided by the Firmware Update include: — Timecode can now be copied from the internal real-time clock. — Scene and take numbers can now be manually entered, and are embedded in the filenames and iXML headers of recordings. — Take number automatically increments each time the record button is pressed. File browsing and playback can now be organized by file or by scene and take. And the PDR now understands recordings made in SMWB Series transmitter/recorders and can list their format, length, timestamp information, etc. (Note that the PDR cannot play SMWB recordings because of the sample rate mismatch.) For greater convenience, recording segment size has been increased from approx. 200 MB to 4 GB. On the largest SD card size supported (32 GB), the maximum number of segments a single recording can have is 8. And finally, the two original file naming templates (“Clock Time” and “Sequence”) have been enhanced. Download it here (update instructions are linked on the page): https://www.lectrosonics.com/Support/category/93-firmware.html
×
×
  • Create New...