Jump to content


  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by TimoK

  1. Hi RsmithSound, I'm sorry to hear that you are affected by this issue. We're just beginning the production of the upgrade kits, and are working through the list. You would do me a huge favour, if you could send me your shipping details including kit size, contact number for UPS to timo@rycote.com, so I can forward it to the team Sorry again for the inconvenience! Cheers, Timo
  2. Hi All, Finally we are about to ramp up production for the fix kits the upcoming weeks. The kits will include a set of new 3D-Tex socks (we've achieved great improvements with different cuts the last weeks as well), and a new Hytrel swivel arm which decouples the basket from the boom pole even more.. Any of you who are affected by the issue, please send me a mail, so I can add you to the priority list to make sure you get these ASAP. Cheers, Timo
  3. Hi All, being so focused on fixing the issue with the new 3D-Tex socks, I forgot to mention that there is a quick and dirty solution to get rid of the handling noise until we can supply the new socks. Please just take off the cotton / Merino wool socks from the basket and use the skeleton just with the windjammer instead. I will keep you posted on the fix Cheers, Timo
  4. Hi all, First of all thank you for getting a Nano Shield. After receiving the first reports we've been able to replicate this on some Nano Shield in our lab. We started immediately to work on different solutions with good results. The 3D-Tex sock was on the roadmap for later this year. So while testing early prototypes we found that it eliminated the issue completely. Instead of trying to isolate the structure borne noise, which always is a trade off between efficiency and stability, we absorb the energy with the spacer fabric on the basket skeleton. This way we effectively prevent that the basket structure can convert it to air borne sound. Long story short, or sincerest apologies that you received a faulty product. Please share your shipping address with me @ Timo@rycote.com . We'll send you a pre-production version to solve your issue immediately. Once released, you'll be able to pick up a production version with our compliments at your next dealership. Again my sincerest apologies. Timo
  5. Hi Daniel, Thanks for reaching out. Matt is right, the active filter PCBA doesn't allow for digital microphones. The plain cable is available as standard spare part, same as the Lemo, MZL cables. So you should be able to get it at your next trusted audio dealer. Please feel free to give me a shout, if they don't know about it so I can give them the right order code etc. Cheers, Timo
  6. Hi There, I believe that we took this conversation offline already? If so, we have been able to recreate the issue in the AA size basket and are on a solution already. We made up some samples of several solutions which we'll send you to test them Hope that solves the issue. I'll post the winner here as well. If you are someone else please send me a pm and we'll get it sorted. Thanks so much for flagging this up Cheers, Timo
  7. Hi Daniel, There'll be sets of 2 tips available with launch for a UK MSRP of £ 34.96 ex VAT. Cheers, Timo
  8. Hi Pan, 1) the PCS-Boom comes with one generic 3/8" tip and you can use it with whatever you like. The Classic, and Cyclone Adaptor were made based on feedback we got from the sports broadcasting industry. They still didn't use any quick connection system even though their workflow would strongly benefit from it. One of their main reason was that they were scared of the amount of replacement spigots they would have to buy after every season, as the windshields are thrown around by non-sound people during setup and teardown. Therefore, they were asking for a more integrated solution. While designing it, we also took the chance to reduce lengths, and weight, and to design a new / better XLR holder. However, our boom pole beta testers really embraced the idea but for a very different reason. According to them, no matter how strongly you tighten any 3/8" thread, it still happens that you accidentally loosen the connection with fast mic rotations, and heavy or long mics. 2) Yes, the Modular adaptor is retrofittable on all Modular generations, Pre-Modular, Supershields, Super-Blimp kit, Perfect For basket windshields, Classic-Softie Kits That's a really good idea about the chart. Let me check whether we have a document like this already. Cheers, Timo
  9. Hi All, We really thoroughly tested it in Germany... I'm still based in Hamburg, and we used the facilities here and a big workshop in Berlin to test everything way beyond its capabilities and continuously improved it until we were happy with the results. One example is that we increased the connection strengths to ten times what was specified when I took over the project. Basically the only thing we left untouched is the mechanism itself. The rest was flipped upside down and modified to a degree that it looks like a completely new product. However, it's still based around the clever mechanism Rycote developed about 3 years ago. I don't want to hijack this thread to advertise our product, however some jigs and machines we used are shown in the IPS video below. If you have any questions, please pm me. Cheers, Timo
  10. Thanks All, very good input, indeed. I will definitely have a play to see if we can make something happen. I might come back to you and ask some more question when I'm dicing into it. Cheers, Timo
  11. Very interesting idea Eric, will give it a thought. Thank you However, as we would need some new tools to make this happen it won't be an easy decision to take, and I'm afraid it wouldn't be available soon. Anyway, it's definitely worth considering. Cheers Timo
  12. Thanks Vas, it's a new challenge and was a chance to work with some of the nicest people in our industry... Love it!! Hope you're doing great, too, sir.
  13. Thank you for your honest feedback Eric, and glad to hear that you are happy with the BBG. I will look into this but as mentioned earlier, I have some doubts that the very short body would allow to hold two Lyres, and a BBG. Please bare with me to give it some thoughts. Cheers Timo
  14. We swapped out the internal XLR with our short right-angled XLR some time ago. So, now the WS-10 works with mics up to 13cm lengths.
  15. Hi Eric, Just curious, would you prefer a smaller diameter BBG over a WS-10? It's not that much longer than the CS-M1 with BBG and connector and provides a far better wind protection as it also covers the mic body and the connector. http://mymic.rycote.com/products/windshield-ws-10/ A BBG might be tricky to mount and still have enough space for the Lyres.
  16. Hi Ilari, yes, very light microphones are a challenge to suspend. The distance between the Lyres plays a huge role, too. With such a short body, the weight of a windshield is mainly carried by the first Lyre. The longer the body / distance gets, the more the second Lyre can support the first. Therefore we had to go for the 82-shore in the front because it needs to be able to carry a Softie and most of the weight of the mic. The second Lyre had to be 82-shore to control the side movements. When you attach the Softie, you obviously have the main load before the first Lyre, and the body acts like a lever. Thus, the 2nd Lyre needs to be strong enough to keep the reinforced side movements under control. However, we of course tested other combinations and mounts. This setup proofed to be the best compromise between suspension and mic control on the end of a 5m boom pole Kindly Timo
  17. Hi Armin, Sorry for the belated answer. Just to put it out there. You can just take the C-arm with UFO suspension off within a second with 2 fingers. Cheers Timo
  18. Hi Miles, maybe try to go through our page which is responsive: www.ambient.de/en/university Hope you like it! Timo
  19. Dear sound community, As timecode and sync technology is our passion, for many years we wanted to develop easily accessible, short-subject educational videos that break down and explain these modern production elements. Ambient University provides the information and instruction for low budget productions as well as the most sophisticated setups all around the world. Our videos about timecode and synchronization provide in-depth background information, while other videos demonstrate how to use that knowledge in the field. This video library includes step-by-step tutorial videos illustrating external timecode and sync distribution setups with the most commonly used cameras from ARRI, RED, Sony, Panasonic, Canon, etc. Our goal is to continuously develop and update the channel to provide the most comprehensive pool of knowledge on this topic – that's always available in your pocket. We hope you like it and of course are open for new video suggestions.
  20. We proudly present one of the biggest Firmware updates in our history. Including Complete GUI overhaul, New Smart TRX Mode, Full Jam Mode, Custom Slate Clap Display, ... and many more improvements. To get the full story, just follow this link: http://eepurl.com/bMtgIT or just download Firmware 4.01 on www.ambient.de/en/downloads Kindly Timo
  21. Dear Ambient Recording friends, we are happy to welcome another key player of our industry as new member to our ACN™ family. With the integration of RED Digital Cinema cameras into our metadata system, we now are able to provide camera information to script and post from the two most popular cinema camera manufacturers. Furthermore, syncing RED cameras with an ACL 204 now is plug-and-play. Additionally, we are proud to present the first manufacturer that has integrated the ACN OEM module, and to introduce great new accessories for the popular ACN-LS digi slate.Please visit us on IBC Hall 8C73 and get some fresh Munich beer or taste some wine.To get a free IBC pass, use the link below and use our code 4879 to register.We look forward to welcoming you. Free IBC Tickets Read the full IBC news
  22. Btw. it is recommended to always keep the slate firmware up to date. For example the mentioned light sensor steps were retuned and more steps were implemented. Kindly Timo
  23. Hi all, Just some clarifications. Supercaps always charge slowly, thus turning the slate on and testing it after a few minutes won't show you the backup time you'll get when your slate was running for some time. The charging circuitry is disabled when the slate is switched off to prevent for permanent power consumption. So by the time your charged batteries need to be replaced, the supercap should easily hold the TC for 10 minutes and more. The advertised 14 minutes are no marketing data but measured time if you leave the supercap the time to be fully charged. As Bud, Sarcanon, and Eric stated 4 NiMh batteries should easily hold up for an entire shooting day even when it takes 14 hours or more. Cheers Timo Hi Soundpod, the bloop light dimming was just put on our list! Thanks so much for the input. Kind Regards Timo
  24. Syncing Mad Max - Fury Road I had the pleasure to do an interview with Ben Osmo, Production Sound Mixer and Oliver Machin, Sound Department Coordinator & Vehicle FX Recordist about their work on Mad Max - Fury Road in the desert of Nambia, Africa. Three units with up to 12 cameras worked simultaniously, sometimes up to 7km (4.35 mi.) away from each other while driving with 60-90 km/h (37- 56 mph). The air filled with desert sand containing metallic parts that drastically decreased wireless range, while the VFX dpt wanted the camera to use the UTC time information from the GPS satellites to be used as the reference for timecode, which enabled cross referencing between GPS positioning and the pictures. Over the course of our three-hour interview, Ben & Oliver recalled detailed information about their workflow, the tasks they had to manage, and their solutions to the technical challenges introduced by production demands and environmental conditions. Read the full story
  • Create New...