gpiegari

I've always been bothered by "zipper clink". Even if it's on the backpack of the guy in front of me as I walk down the aisle of a plane. As a matter of procedure, I cut the metal "handle" off just about every zipper and replace with knotted cordage or a fancy molded option. Sound bags, backpacks, jackets. Pretty much everything. Added bonus is the weight savings. It's minimal of course, but you might be surprised by the small heft of die-cast metal waste in your hand as you toss it in the bin.

It's not just "hidden vs. exposed" wherein exposed means obtrusive. There are options of "exposed but discreet". A clean white LAV on the chef coat, a gray LAV on a tweed blazer, or attached to a tie with a busy pattern vs. the lapel. What bugs me to see (and I'm sure everyone else here) is a placement that looks sloppy or hurried. I also don't like seeing the clip on the outside with mic inside. As if the mic is hidden but clip is not. Glen

I use these for rock shows: https://store.sensaphonics.com/ProductDetails.asp?ProductCode=ER-20+Pro

Why not use the 633 AES out > D4 AES in option?

One big advantage is you can easily make the pole waterproof. I use this Ambient setup occasionally. Glen

They do make a version with regulated output. I could see that being a problem with the 788t.

PM sent. Glen

Overkill for most workdays but for extreme duty I love these. http://www.511tactical.com/tactical-battery-case.html

This new cantilever Rycote design is similar to the old Lightwave mount which was actually very quiet.

The FS7 does provide metering with a visible scale. Press "status" and scroll to the second page.

For maximum benefit of full feature set, best used with TRX900CL

For power it does use the shorter shank switchcraft 760k Still 2.5mm so your other power cables will work, they just won't lock.

Bought two immediately. So far, flawless with TRX900CL. Used with Canon C300, C500 Sony FS7, F5, FS700, PXW-X200 Camera ops LOVE them and so do I.

The TC is NOT transmitted via Zaxnet but embedded with the audio signal IF you are using the TRX900CL cam link. This was a huge selling point to me and caused me to immediately upgrade my entire cam hop system. Initial tests are very favorable. The new features work as advertised and will be making work life better. The OLED display and status LEDs are great. Now I wish the TRX900CL had the OLED...

Jose has broken the comparison down nicely. I went with the Betso because of the AA cells (already stocking/carrying them), the breadth of information on the OLED display, auto turn on/jam, and no need for a small screwdriver to adjust parameters. I also wanted a solid BNC connector and when I decided, BNC was not yet an available option on the Mozegear.

Audio engine are impressive for the size. http://www.crutchfield.com/p_772A2PB/Audioengine-A2-Satin-Black.html

You can steal my heart, but you can't have my B5D.

Local 487 http://www.iatse487.org

I installed a Transcend PATA SSD in my older 744t. Has worked flawlessly. Glen

The new basket design looks very reminiscent of the old Lightwave zeppelins.

I hope it's the long awaited clothing noise removal algorithm.

Nice Drawers, Jan.

PE Foam (any pattern, any number of cuts) and lid foam for Pelican 1700 (no case) was $140 http://www.mycasebuilder.com

Jack is correct. You design your own layout on the web sight. My design was clearly centered around securing my K-Tek 152cc or PSC Elite large (shown here) and then making use of remaining space. Particularly, gear that is with me OR at "base camp". The zeppelins came to mind and the NP-1 charger.