osborne456

https://reverb.com/item/42432355-neumann-rsm-191-stereo-shotgun-microphone

His brilliant writing helped my daughter survive the sound post world at Comedy Central in Gotham. Encourage all to get his books. 🎯

"Teamwork"- 67 films in 40 years... Thx for your heartfelt tribute & a model of collaboration- bravo both !

Cinela Leo-20 w fur has solved wind many times in or out of cars...

Just twice in 3 years. menu button hold 6 sec.- magical re-set....

http://www.poweredbywatson.com/product/1879/Watson-B_4205-NP_F770-Lithium_Ion-Battery-Pack-(7.4V,-4400mAh) Watson NP F770. aka SONY NPF series. Have had 6 past 4 years, only re-cycled one at year 4. quick re-charge. Always have 4 on hand but hardly go past the 2nd per day...

+1 INV-lite 19. Wind bag- for Sanken Cs-M1 Cinela Leo-20 transparent & light. Add fur for about 200. total.

With power off, hold down both the Menu and Meters buttons. - Turn on the power and continue to hold down the Menu and Meters buttons until a message saying "Formatting Settings, Please Wait..." appears. Then you can release Menu & Meters. - Once the 633 boots up, navigate to MAIN MENU > 11. QUICK SETUP > 1. LOAD SETTINGs, then select & load Factory Default.

Denecke TS-C slate. "compact" & reliable. for myself & many Boston colleagues...

Cinela Leo-25 with fur works in moderate wind for an MKH 50.

30 years with neumann km150, km185 & kmr 81i - from heated Panamanian rain forests to sleety Swedish reindeer running turf- no problems.... so far.

Correct. Boston U. grad school had some and several Cinema Products CP 16- workhorse "conversions" -standard news cameras... all mag stripe.

+1, many years for the K-Tek K102CCR Klassic Series Five-Section Lightweight Boompole

+1

Your Boston & New England family is with you on this and so many other of your thoughtful, timely notes...

Set screws loosen... and as many of us who ab-use the 50 daily eventually learn.... it's no wonder. Round-trip Boston to Connecticut, adjusted & back in 5 days. Grazie mille Sennheiser-Neumann sorcerers.

brilliant, mate...

Delkin Devices USB 3.0 Dual Slot SD UHS-II and CF Memory Card Reader

On Delkin CF 700x and on Delkin SD 633x cards- 3 or 4 out of more than a dozen of each have produced "pops, thwaps" about .5 sec each and I also suspect it's the client's reader. For several months now I hand over production cards seated in my card reader with usb attached instructing Data/DIT to leave them seated for the transfers.......no more "thwaps"

Pete's 12vT to 48v conversions work flawlessly.

What I've used in bathrooms might work for you- Neumann KM185, Senn MKH50, Neumann tlm102

On a feature a few back a Schoeps 41 cap died & I went 3 happy weeks with a Neumann KM150 & a KM185 inside [cranked, but flat- nice] & a 416 EXT. Pleasant dailies...