Jump to content

joinwoo

Members
  • Posts

    30
  • Joined

  • Last visited

Everything posted by joinwoo

  1. My Guess, probably the camera input hv diiferent attenuation to ur input jack. May be u need to add resistor to do this but check the camera manual first ...
  2. howy, thanks for your testing ,however , there is few people experience similar freeze and seems not one or 2 case, at least i found here. What i have tried ,seems pointing to mirroring problem as i mentioned above,And the freeze is not periodically happened ,just random on field recording , So i really could not locate the problem is hardware or software, and one more thing , i have experienced hardware problem of one part of my machine and get it changed already....Seems won't have 2 hardware part problems within one machine?? just matter of probability is relatively low, right?
  3. I only got 2 Transcend 133 X Cf , Other are other brand, I would try Swap pri and mirror Card , see whether it still happen or not ,thx
  4. Jack : I used both Transcend 16 Gb 133 X in primary and mirror slot before, and has format mostly each time... freeze still sometimes randomly occur, but once i tried mirroring off, the whole day shooting is fine, so i suppose the situation pointing to mirroring..... Greg, I found it quite safe for one day shooting of docu i experienced, i used to be though that mirroring is just for safe for recording , but now seems thing happen opposite.... But i do need more days testing ,since the freeze is very randomly.
  5. I discover most freeze caused by Mirror CF slot, Even i used the Transcend 133X 16Gb still sometimes Freeze happen....but 1 times as i close the mirroring , the whole day shooting saying 5,6 hours no freeze occur... then i open mirroring for copying files , mirroring 2 cards both are Scan disk 16Gb 60Mb/s , the first one ok, the second freeze once during mirroring....
  6. Over covers is great product as basic windshield ,sometimes to elimination of silly clothing noise.... in my exp, i just stick the lava on stickers and stick the over cover , i use the wall mount sticker which is grey in clour made by 3M , cheap and great holding power and elastic, so one side with the overcover and one side just tape on clothes....I don;t find that will create any clothing noise, oppositely absorb much...however ,sound will not as great as before, i though just is a must in fact... I used to be using the sticker of the Rycote overcovers paackage , i found it is not enough holding power on all clothes texture ...and too expensive....So i find the substitute which i mentioned above... The undercover is just the lighter version of over cover i though..... And the clothing noise problem should be related to position of lava mic and lava mic design..... The sticker i used Scotch® Permanent Outdoor Mounting Tape VHB™ Double-Coated Acrylic Foam Tape A very high bond, closed-cell, clear, acrylic foam tape on a red polyethylene liner. Ideal for indoor and outdoor uses Use instead of nails or screws Model 4011 Size 1" x 60" Holds up to 5 lbs (20" of product requried)
  7. Thanks for all...... i have tried both Ambient and Sennheiser one.... i prefer Sennheiser more , personal reason on the design , so i would like to find them....and i would look into wht Jeff suggest Gary Woods QuickRelease ....Seems interesting
  8. Dear all, I would like to bought this Sennheiser quick release , but do anyone know the exactly name for this model ? I search on few big sound websit ( B & H, Marketek , Trew , Film tool......) But not yet found this? would anyone give me a clue of this?Thanks Jacky
  9. Dear all, This is the first time I buying lava mic as fresh soundman, and I plan to buy Oscar Sound Tech OST 801 or 802 from pro sound....http://www.pro-sound.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=PSS&Category_Code=Oscar&SortBy=&char=&show=9999 However, i have few confusing abt this... What the Hardwired means? Just look up on web and can't figure what that meaning...And micropohne with pigtail meaning no connector is wired or soled? So i need to do it by myself? So if i would like to buy 1 lava mic and ready for my G3 set , should I bought the mic ,then buying Sens TRS Add on ,then soldering by myself? Thanks for all ur unique experience sharing..........
  10. Sorry hemmer , i am not sure i quite follow you , but when i test i quite sure those input limiter, card limiter and output limiter are not reach during the problem happen..... because i not test them with human voice and high volume ,juz around -20 .which the input meter around -20 too..... and that is exactly the same setting in other channel , and that channel works fine Anyway, thanks for your advice
  11. Thanks SENATOR... thanks to point out the point from the previous post . And i have already sent the email to Glenn a week ago and discuss with him about this question before i response others helpful advice
  12. That great... i really hope these report would help out Zaxcom and help us slove question further..... And i do hope Zaxcom would keep update us when there is arrangements are made and planned. Glenn has actively response on my request ,that is good.... And the thing i can do right away is wait for Zaxcom have further arrangement..... And it is nice to update others by this post if the problems solved
  13. My version is just nomad 4 with six input...... bernie , i have personally email to Glenn about this... And he is willing to help this... I though you should send him a email to have further action on that.... As the problems seems occasionally . I just afraid one day when i need it, it suddenly cause problem... I though it is good to report similar case to Zaxcom, may be this would improve the manufacturing of nomad.... And it is good to know that we both have same problems, proved that seems not by manual setting error.
  14. yes.... I know this issue...and i tried that before...seems no help...i even pull out all cf after restore factory setting.... things keep happen.... i have email to glenn, and he has follow my problem, just because seeing reply here and i keeping feed back.... thanks for all, all of you are helpful to such fresh recordlist as me
  15. The critical point of the trim is + 10 db ok, then +11 db,sound miss out or just like crazy clipping sound with the meter are still stay around -24 to -22
  16. I have call factory setting and test again.... same problem again ...and I tried this for already 4-5 times ..... After than , and I try route Card mix . Input 3 to Ch4 post fader by other setting still is factory setting and Input3 prefader to Ch3 ... by no other input connected...... only input 3 connect to my tascam dr 100.... both Ch3 and 4 stuck up after few minute and no sound with Headphone........ I even try pull out all card ,then rest factory setting..... the problem is exactly the same...
  17. I would try them .... because the problem is not happen immediately and regular time pattern....I need take many time to test each setting until the problems occur and be sure...
  18. Jack... i tried that before.... i have restore the factory setting and even update 2,74 one more time....
  19. I already updated to 2,74 and my situation is the meter stuck up and have some digital bit signal as i move the trim ...... but sound is miss during the triming.....i discover the problems mostly occur when no phantom power apply, wireless set....
  20. Bernie For my case , it seems irrelevant to the cable , since i have try same cable and same set on other channel seems ok....But honestly speaking , i guess that is hardware problem.....because my testing is not using nay precise tester , and do u problems happen more than once?
  21. After few times different testing, seems still point to hardware problem.... because other channel never occur similar situation.. Do u have any advice for this issue? or could you plz share your experience ?
  22. i would try this... thanks.....but burn zaxnet do u mean, bootloader burn?
  23. david...thanks for ur advice... i use wirless mic in the ch3,so no phantom is set...i use another wireless both are lectrosonic 400 and dpa 4060 lava mic... when i shift to ch 4,5,6 ,problems seems not happen, and i also try to figure out what pattern of it occur...i just conclude that in sometimes it is in good working status.... it seems like software bug causing latency or the plug easily get overheated, but all that i guess.....
  24. for nearly 4 month....seems need to be wait another4 month to get check up....
  25. I just have test my newly arrive nomad in location, however i discover that the input 3 channel have problem or easily overload, when i turn the trim above around 10 db , it starting missing sound and suddenly have few clipping and miss sound again..... i havetest other device on ch 3 , same problem, i test the device orginal use in CH3 in input 4, no problem occur.... what should i suppose to do? the limiter setting are same in every channel..... my firmware is 2.71
×
×
  • Create New...