Sandor Gyurkovics

yeah, haven't seen that rig. nice option for when adhesive may not do the job. sometimes more adhesive just means more noise as it slowly rips loose. my go-to for reality shoots with little time and unknown action is cos-11 in an RM-11 with winscreen on, prerigged with snot tape on the back, and an overcover stuck to the other side. mounted to clothing with overcover against the body it works in many situations. Learned that one through the grapevine from Rylan Kerbes in vancouver.

works for scripted content, sure. I'd love to move to cinela for my doc kit, but the inside/outside thing is tricky. there is no schedule. you just go outside when you need to go outside. and short shotgun often gets used in both situations. i have no idea how these blimps come apart...i take it the mount is integral and the shell doens't just come off. still learning. they seem like more complicated beasts than rycote blimpls.

I run into the situation a fair bit. I use the betso bowties on my bag with the same RF distro that you are looking at. And then I put my shark fins wherever they need to go and cable them to my bag (unplug the bownties). If I need to pick up my bag and run and just unplug my shark fins And flip over to the bowties in 20 seconds. I’m good to harness up and get going. So basically, I just have the pigtail BNC cables hanging out of my bag that would typically attach to the bowties plugged into 50 or 100 foot cables with couplers on them. So I am literally just plugging My pigtail cables into two cables that are sitting on the cart/desk/table/Whatever. Super easy to switch. I have seen Lectrosonics Larry write in this forums that the loss is less than 1db using couplers. So you can join cables as needed and not worry about it.

Hey, does this mount actually have room for the foam? looks super tight. thought about this one but wasn't sure i could make it go. i'm leaning more and more towards cinela after using my INV6 for the last year. still pretty rough for handling noise. older carbon k-tek pole.

Hey, have you actually used the hixman adapters by the way? I was looking at a few of them....lectro to 3.5 for track E as you stated, plus microdot to TA5 for dpa goosenecks and lectro TX. 1/3 the price of the dpa adapters, so wondering about actual field use an track record.

Sounds like i should move to the US. i don’t know any producers that would pay 500 for a 2 wire kit in vancouver, no matter how hard i try. But we push as hard as we can

Client dependent….350 down to about 150 for the mentioned kit in vancouver. Bottom end being a favour or a no budget thing you just really want to do. Average closer to 250-300 id say. I like to put all the gear as a line item on the invoice when possible, amd then show discounts if any. Teaching moment for producers. I would include one sync box and charge beyond that. If 2 or 3 were rolled into the cost i would aim for the high end of rates…or higher if i can get it, as that also means more hops amd comteks.

same question....3 years later. they are still out there but thinking they aren't for sale new.

I second the microframe as an economical timecode slate. doesn't clap, but displays timecode in all lighting conditions and has space for labels/IDs. it's the bomb for gopro work. give one to all ACs. good in a pinch if you end up with DSLR's too. if you want a clap, velcro one to a dumb slate....$300 vs $1200. maybe not pretty, but ofr bag mixers that get asked for a slate on the day and didn't have time to rent, and only need one for 4 days a year, works well enough.

ha! same with me. have 2 of each. liking the sankens way more. really like them for wide/tight/slider 3 cam interviews. there's enough reach to get it done for the wide and not rely on the wire or a longer shotgun that would be less forgiving with subject movement in the chair. The 50 doesn't cut it in that situation. it's a lovely sounding mic in lots of situations. I use it indoor and out. not loving my mount though. I still put it in my old senny blimp that I use for the 50. It's fine, but not ideal. Like the look of the Medium cosi perhaps. I have the INV mount with the black lyres (the light ones) and a bubblebee for interiors. super light. love it.

I think loads of us have probably used 4 receivers in a bag with acceptable performance. bags change shape with job needs. I've used 3 with whips many times, 4 less often, but often enough. Unless you need max performance on everything you'll be fine (i.e. if you're near the scene/subjects and they aren't 150m away). I also us an RF distro, but keep my whips in the bag if everything gets overloaded...usually if everyone is in close proximity. I wouldn't worry too much about it. You said it was short term, right? go for it.

I just bought two of these mics finally. I’m using the rycote INV mount with black lyres in cold weather with a bubblebee windkiller indoors and outdoors. will have to put a grey/hard lyre on the front in the summer i suspect. the black ones get mushy in the sun. haven’t bought a blimp yet, but may try and use my mkh50 blimp. i bought these for a show that needs good/small camera mics, and plan and ditching my 50’s after the show and moving to these. only boomed on day with them just to test them out, but they were pretty nice to swing. light! handling noise with a ktek classic pole and the tiny inv-6 mount was not an issue at all.

that’s some good backlash (with no offence… of course ) about someone doing what they’ve got to do to get the job done. As someone who mixes with a bag strapped to my body every day while booming at the same time, I totally get why someone would do this. I’ve done it many times to make mixer adjustments that needed to be done, and I don’t exactly have the wrists of steel required to one arm boom for more than three seconds. it’s totally risky move, but practice makes perfect! Reality TV can be very unforgiving.

nice! sounds like a very useful tool. i can see a lot of value in that.

love it. looks like a great tiny mixer, and having 7/8 on faders is fantastic. the new firmware to access 7/8 on the recorder's programmable toggles was a big help, but this is better.