Jump to content

Pete D

Members
  • Posts

    54
  • Joined

  • Last visited

Everything posted by Pete D

  1. I don't change the cone very often, 99% of the time it just lives with the 3-pin xlr on there. The thumbscrews are there so when I do want to change it I don't have to take the time to grab a screwdriver. Granted it doesn't save a tremendous amount of time but for that little bit of convenience I think it was worth the $6 it cost.
  2. I changed the screws on a TRX742.5 out for thumbscrews so I don't need to have a screwdriver handy when changing cones. I got the thumbscrews from mouser (part #534-2402) and cut them down to size with a pair of electricians pliers.
  3. Hi Everybody, I've been reading this site for a little while but this is my first time posting. Anyway, Going back to the op's original topic, Sanken makes the cos-22 which is a 2 ch. lav which Sanken says "can be used as a noise cancellation directional microphone pair by reversing the phase of one channel before summing the two outputs". Has anyone worked with one of these before?
×
×
  • Create New...