Jump to content

glenn

Members
  • Posts

    1,383
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by glenn

  1. I do not think that it can go on every home screen but I am sure we can put it somewhere else.
  2. All facilities of input and output are available on Nomad without limitation. Glenn
  3. Here is a sweep of the filter in the Nova. It is 200MHz wide (20MHz per division) set at 541 MHz. It shows that signals at 460MHz are attenuated by 36dB. This is enough to totally eliminate interference by walkies. It would be nice to see what filters from other products look like. I do not believe that there are any filters out there that are as effective as the ones we use in our products. The sweep was obtained by connecting to the antenna of the Nova with the output coming from the RF output of the Nova. In terms of distance a walkie that would cause interference at 40 feet from the receiver would now need to be 1 foot from the receive antenna to cause the same interference. The big advantage to the Nova filter is that it can dynamically change to allow for frequency scans and receiver tuning and channel selection. Filtered antennas can not do this necessary function.
  4. Put out the test tone and see if that is ok. If it is make sure the Encryption code is 000 000.
  5. This would be impossible. The ERX can only output audio and is not DC coupled so it can do no harm. Glenn
  6. That is really great. I love innovation. What is the patent number?
  7. Timecode out is only available in mono mode. The RX200 does stereo and time code
  8. I am really happy you like the Zmt3 X. I worked really hard on the gasket design to keep water out. For anyone that wants 12 hour run time at full 75mW output power this little guy does it with average battery cost under 10 cents per use. It is our first Neverclip bodypack with 2 channel transmission and 2 separate mic inputs. And who does not like Motorola Batteries and chargers.😊
  9. "Has anybody tested the battery life of the ZMT3 in "record only" / "NOTX" mode? Thanks in advance!" ZMT3 in record only mode is about 12 hours.
  10. glenn

    nova!

    There is no need or option for an FP8 or any fader add on. The 5 faders provide instant access to all Nova inputs. All of the assigned channels can then have their inputs trimmed or the wireless transmitters preamps trimmed on the same knob while in use on the talent. This system establishes a new way to mix that we think will obsolete the current system of rotary pot control for bag style mixers. Please feel free to call me if you have further questions.
  11. Glad you like it. The URX is designed to be a body worn receiver but of course can be a camera link receiver. As pointed out the RX200 is our flagship for camera link work while the URX is kind of a new animal with features nothing else has. Tough to do it all.
  12. When The Deva II was new 1997 there were no Li batteries. So this condition was not anticipated. All current Zaxcom recorders are very exactly regulated no matter the voltage of the battery or external power source. Glenn
  13. glenn

    nova!

    Not yet. I expect around end of July.
  14. glenn

    nova!

    You assign the inputs to the 5 faders on up to 4 banks. Once assigned the trim button and the zaxnet button instantly make all 5 faders control trim or Zaxnet if selected. The function is then deactivated and the 5 knobs become faders again. LED rings and flashing buttons indicate that the trim or zaxnet control is active.
  15. glenn

    nova!

    Just the ones you want. There is no limit to how the faders can be configured. The Nova is also smart enough to ignore banks that have no assignments.
  16. glenn

    nova!

    The 5 pots of the Nomad are set up with instant access of 4 banks of assignable routing allowing 20 channels to be controlled with unparalleled flexibility . I think it is time to look at faders differently. Nova is a new common sense approach that allows the same fader knob to control fader levels and trims with the same large no compromise knob. All adjustments have a great smooth feel on a spacious non cluttered control area that we are sure will be a future trend. The single size control knob combined with the channel assignable banks and LED input meters with fader position indication are a defining feature of Nova and one that I am very happy that we went with.
  17. Glad to see a modern solution for the old file systems. The Deva II was really our first recorder and in many ways was too cool as we made it from scratch with no idea what it was going to be until we were finished. The Deva II was the first dual media recorder, First with pre-record and first 4 track portable recorder. Glenn
  18. glenn

    nova!

    That would not be possible due to the electronics that run the display that are in that area. The Nova could be bigger but then it would lose its appeal of being ultra small and light weight. We make a bigger machine the Deva24. With its large touch screen it may be a better choice depending on what the mixing goals are.
  19. Yes a quick press of the Power button will do that.
  20. glenn

    nova!

    I would say there are 10000 decisions to be made when designing a new product that touches so many lives. Not only did we work with many industry leaders in designing the Nova we listened to the feedback after NAB and incorporated many new features that will be announced right before we deliver it. The size of the display and number of faders are key to the overall dimensions. I and many others are very happy with it. The fader encoders will change how bag mixer/recorders are perceived and used. I think its sets a new standard for size,weight, power consumption and features that dare I say will be a "game changer" for both wireless users and mixer/recorder customers. We will have it out asap. Thank you for your comments Sonyslave. Glenn
  21. It must be assigned to another fader. Check external fader assign and all other fader assigns. If all else fails do a factory restore defaults.
  22. While a backup recorder can be a very good thing if everything goes wrong, with Nomad there is another option. Use Zaxcom wireless with Nomad and allow the wireless to be your backup. With Nomad you can replay all the tracks of the wireless in sync to re-record right from the Nomad. This will save you from not just a media failure or a cart hardware /power problem but it will allow remixing from the wireless and will allow you to recover audio in the case of an RF issue that might interfere with transmission. The other benefit is that it is likely that if the master recorder does not roll, a traditional backup recorder may not roll either. Zaxcom wireless is always recording if you set it up to work that way. It does this with automatic time code reference and no need to jam any transmitters with a cable. Something to consider.... Glenn
×
×
  • Create New...