Jump to content

alexbooy

Members
  • Posts

    20
  • Joined

  • Last visited

Everything posted by alexbooy

  1. https://www.cinemadevices.com/product-page/xoboom
  2. I mean the Rotary Encoder. I use for it for quickly changing the AES input levels. With the RX8+ there is no need for it. Do you think that we shall ever get new firmware for the R4+. We all have some whishses, I guess. Best, Alex
  3. Yes , thanks. So it gives 8 more solo buttons. But while in solo, the recorder screen shows the corresponding AES channel and the HP pot can change the input level, like on the R4+ .
  4. Hi Patrick, can you assign all the 8 pots as solo switches for the transmitters?
  5. I started using an M1 too. Video doesnt play through a Blackmagic interface, but it works on a second monitor through usbC. I hoped that 2021.6 would be an improvement. But it seems not to be. Just stay patient. And sorry that i didnt mention that i am using the mac mini m1. Virtual instruments ( Arturia) play well.
  6. Make a microphone boom into a coax connection, so one of our antenae could be high in the air. My idea, your patent.
  7. Try todo it in a group higher than 30. These are unlocked groups. Alex
  8. Althoug a Nagra IVS it might be the same connector.
  9. The male Tuchel is for external power and the other for pilot tone, is my guess. Alex
  10. Dear soundmen, If I use a receiver connected to my recorder using the aes3 connection, will the accuracy of the receiver clock become the accuracy of my recorder timecode stability? Wisycom mcr42 has an accuracy of 2,5 ppm. What will that mean for my Sonosax Sxr4 ( the old one) getting external clock through aes? Lectro src has the possibily for external clock, a Wisycom mcr42 has not. Thanks for helping me. Best, Alex
  11. it happend twice with films that I had been mixing, that they were broadcasted in mono. They were both documentaries about music...... Sound relay was done using FCP 7.
  12. Hi Bouke, Alex Booy here. How sees a workstation the difference between an interleaved 2 track (boom-lav) and a stereo mix file? By his extension? Another topic, maybe but Avid MC sees the extension _1 thru _ 24 as tracknumbers. So if you try to import an audio file never use _x for anything else than track count. I used it for shooting day. Avid didn't import any day higher than 24.
  13. Problem solved, When using the Shure adapter (CH), the 'model' mode must be in the 'Sennheiser' position instead of 'Shure' position (?). Best, Alex
  14. hi all (and Tom Duffy), I just bought a Tascam DR 10 CH with Shure connectors. I want to use it stand alone, without transmitter. I tried it with a Shure WL93, but after switching the 'bias on/off' switch, to 'off' I only hear sound for a few seconds and then it is gone. I realise that it should be 'on'. Model is switched to 'Shure'. Any idea what could be wrong? the recorder and lav are new. battery too. Thanks, Alex
  15. thanks for the replies, I am curious if anybody is using the Mini transmitter TX700S. The one powered by two AAA's. Best, Alex
  16. Is anybody using Micron's TX700s. The very small transmitter. And happy with it? Alex (Amsterdam)
  17. It seems to have a 0,35 ms audio delay..... Alex (Amsterdam)
  18. I have checked my Sonosax SXR4. I have imported some tracks into ProTools (Spot to original TC) As you can see in the enclosed picture. The recorded file doesn't start at frame bounderies. From the Avid forum: Nagra VI doesn't either. Best from Amsterdam, Alex
  19. Hi Rakesh, great idea. Why is it that new apps don't work with ipods older than ios 4.3? I still have an older generation ipod touch that would be perfect as a docu bloopper (?). Greatings from Amsterdam, Alex
×
×
  • Create New...