alexbooy

https://www.cinemadevices.com/product-page/xoboom

I mean the Rotary Encoder. I use for it for quickly changing the AES input levels. With the RX8+ there is no need for it.

Do you think that we shall ever get new firmware for the R4+. We all have some whishses, I guess.

Best, Alex

Yes , thanks. So it gives 8 more solo buttons. But while in solo, the recorder screen shows the corresponding AES channel and the  HP pot can change the input level, like on the R4+ .

On 3/20/2023 at 8:42 AM, Patrick Tresch said:

 

NO! But the equipment is so complex with interferrence from recievers and other electronics noise that I just follow what they tell me.

Last time I heard a spill on the playback on a track wich was not recorded and at the end it was a faulty cable on my side. They tackled the problem and changed the pin soldering of the cable I bought in Germany. And it worked. So I don't mess with this kind of "black magic" for my understanding.

Hi Patrick, can you assign all the 8 pots as solo switches for the transmitters?

I started using an M1 too. Video doesnt play through a Blackmagic interface, but it works on a second monitor through usbC. I hoped that 2021.6 would be an improvement. But it seems not to be. Just stay patient. 

And sorry that i didnt mention that i am using the mac mini m1. Virtual instruments ( Arturia) play well.

Make a microphone boom into a coax connection, so one of our antenae could be high in the air.

My idea, your patent.

Try todo it in a group higher than 30. These are unlocked groups. 
Alex

Althoug a Nagra IVS it might be the same connector.

The male Tuchel is for external power and the other for pilot tone, is my guess.

Alex

Thanks for your help

Alex

Dear soundmen,

If I use a receiver connected to my recorder using the aes3 connection, will the accuracy of the receiver clock become the accuracy of my recorder timecode stability? Wisycom mcr42 has an accuracy of 2,5 ppm. What will that mean for my Sonosax Sxr4 ( the old one) getting external clock through aes?

Lectro src has the possibily for external clock, a Wisycom mcr42 has not.

Thanks for helping me.

Best,  Alex

it happend twice with films that I had been mixing, that they were broadcasted in mono. They were both documentaries about music...... Sound relay was done using FCP 7.

Hi Bouke, Alex Booy here. How sees a workstation the difference between an interleaved 2 track (boom-lav) and a stereo mix file? By his extension?  Another topic, maybe but Avid MC sees the extension _1 thru _ 24 as tracknumbers. So if you try to import an audio file never use _x for anything else than track count. I used it for shooting day. Avid didn't import any day higher than 24.

Problem solved,

When using the Shure adapter (CH), the 'model' mode must be in the 'Sennheiser' position

instead of 'Shure' position (?).   

Best, Alex

hi all (and Tom Duffy),

I just bought a Tascam DR 10 CH with Shure connectors.

I want to use it stand alone, without transmitter.

I tried it with a Shure WL93, but after switching the 'bias on/off' switch,

to 'off' I only hear sound for a few seconds and then it is gone.

I realise that it should be 'on'. Model is switched to 'Shure'.

Any idea what could be wrong?  the recorder and lav are new.

battery too.

Thanks, Alex

thanks for the replies, I am curious if anybody is using the Mini transmitter TX700S. The one powered by two AAA's.

Best, Alex

Is anybody using Micron's  TX700s. The very small transmitter.

And happy with it?

Alex (Amsterdam)

It seems to have a 0,35 ms audio delay.....

Alex (Amsterdam)

We know that Sound Devices have accommodated this issue and Zaxcom have not, but what about other recorders that have timecode anyone know what they do?

Start / stop on any sample or on 00 of frames?

 

Sonosax,

Nagra,

Fostex,

Aeta,

Roland,

Tascam.

I have checked my Sonosax SXR4. I have imported some tracks into ProTools (Spot to original TC) As you can see in the enclosed picture. The recorded file doesn't start at frame bounderies. From the Avid forum: Nagra VI doesn't either. Best from Amsterdam, Alex

Hi Rakesh, great idea. Why is it that new apps don't work with ipods older than ios 4.3? I still have an older generation ipod touch that would be perfect as a docu bloopper (?). Greatings from Amsterdam, Alex