“Depending on your setup, tone from the recorder will get sent to ALL outputs. It’s not meant as a signal flow check, it’s meant as line up. For signal flow tone use the tone generator in your wireless receiver.”
Great point Constantin. I got burned once with my 633 on a two camera shoot because I used tone to make sure my Ta3 outputs were the same as my xlr outputs as in Left and Right. They were. Left was indented tone while right was solid on both sets of outputs. Only problem was I forgot to route the Left/Right outputs to the Ta3’s. Like you said Tone will come out all outputs regardless of what’s routed (that’s the way I had it set up). Client didn’t mind as we had the recordings not only on Camera 1 but from the files on the 633. Learned my lesson though.
.png.279748a58a2b862b7aa5f3b84126e232.png)
