filmsalang

SD can not properly creat metadata on Mixpre Series since the launch. And people asked a lot about wrong metadata(TC End) but, they introduced other plugins. Because that doesn’t make money?

A permanent discount before a new product launch or too old machines, that is every company does as ritual. I am not saying the hardware price but software and their business model since additional plugin launch.

Without soundmixers like us, their business doesn't work at all. That says everything. Instead of promoting their products with pricy tag, why not some discount sales or special events for us in this hard time. I never heard they discounted their products If I am right. Thank you SD, I bought kina many machines from you from the beginning of my career. Thank you for the good machines.

Too expensive though. What does SoundDevices do for field sound workers for this horrible time??

Kwak! 2 feet away from each antenna and above human heights in normal situation as Shure says. Don’t raise much power on antenna in a small room like that in the picture. You will get fried by overload. Don’t get too close to talents(transmitters) on that powered antenna.

Yes, I absolutely can do that. But l like preamp quality in Maxx, so I just keep as a backup. These days I hardly use Maxx for high track count demands and uncomfortableness from CF medium and transcoding process. 10ii is much simpler.

Just go buy Mixpre 10ii and invest good wireless packs. I am using it with wisycom Mcr54 and lectro LR/SSM combo. 10ii is amazingly good machine with many chnnels. Pricewise Mixpre series has best quality and economic value IMO, even lightweight. I used to have Nomad 12, Maxx(still have for dramatizing gigs), 702t(in old days), f8n(sold cause of too little knob). Before investing another upper class machine, I will happily stay long with Mixpre 10ii. After checking around Cantar, SD 888, and Sonisax, I decide Sonosax is my landing spot.

You too.

Very Ugly Stride from Sound Devices. Zoom will take over soon.

I am using TL40. But TL40 is very weak to RF interference. If you put the mic head onto Cell phones or Ipad you will get a lot of RF noise. So I don’t use for critical works. Just buy decent lavs.

Undercovers are so bad as you said. Undercover's material choice is basically so bad. It's kinda filmsy and rough?, not that soft at all. Just plastic or rubber concealer is much better. And just put the mic onto fabric(cloth) inside is much better, it the mic placement doesn't break the shape of clothes.

Lectrosonics 822 may get easily over $3000.00 in price. right?

The only thing I really curious about is how the noise performs....If it spills less noise like G3/4, I will go for it.

You should know what I am saying...w/o HPs!

If F6 has 4 outputs, that should be a beast for me.

Taking out the internal SSD would help the heat problem??? I am considering either SD833 or Nova... If that helps, SD could sell 833 w/o internal SSD as an option.

If a manufacturer already knows their own issue with their products, they must inform the issue to the customers. That's how we can get around before the issue and rely on the company.

I didn't wire for Sen but for Sony Uwps. shield to Tip, either Red or White to Ring( or Red + White to Ring) and no connection to Sleeve. but this wiring introduce some RF interference when I get the mic head closer to a refrigerator. that's what I can't solve the issue for now.

Try MIPRO MU55L....They perform great...very natural sound...much better than Countryman B3.....and cheap. Someone complain about fragile cable, but couldn't find that issue to me at least. One problem is proper wiring is needed to avoid EMF noise, except that...the lav itself is great...!! https://www.bhphotovideo.com/c/product/1071119-REG/mipro_mu55l_omni_directional_sub_miniature_4_5mm_lavalier.html

https://www.bhphotovideo.com/c/product/1450315-REG/switchcraft_aaa3fbgglppkg_aaa_series_low_profile.html?sts=pi At B&H they are not in stock but 4.71 each. I will try soon.

I am trying to solder LEMO 3pin connector for SSM transmitter soon. But I figured the pins inside LEMO are so tiny and the bigger problem is Cos11d's wire itself is so fragile and thin specially white wire. I searched here and there...but not easy answers for me. Anybody can give some tips?? Pre-soldered Lavs are kind expensive.

Yes,,,I will do soon... but looking for some fast way to fix it from field experience. My Nomad already have changed some input board for phantom power issue cause I bought this unit early time. If I live in the U.S., I would have contacted right away...but I live in S. Korea.

I am a user of Zaxcom Nomand and Maxx... My Maxx is great and never gets problem.... but, Nomad....hmm.... Yesterday, I got record 10 iso tracks on Nomad with 1 line level and 5 mic level all for wireless, and returen 1/2, 3/4 through Maxx outs... I set the basic settings for mic and line level and other labels before shooting day. and the shooting day, I got screwed.. When power up, the level is so low.....cranked all the way up the gains but nothing happens..... Actually I got this problem several times.... and as usual with this problem..I turned off and on....again...and again... but this time it didn't do any magic...so I change my input 1 to mic level...(this was for my lectro LR receiver).. and....turned 2 or three times on and off. finally I got levels..... and I never turned off even lunch time....because I got scared this would happen again.... ...I'm not sure....If any nomad user has the same problem as me... I even clear the whole setting(default setting) before shooting day, but...It happened again. I need any help..!!! Thank you for reading.

The mic preamps in Digital Bolex are just great from my experience. I have Digital Bolex and tested it. The preamps are sound full and rich through my shotgun mics. Great enough for direct recording or for back up in-camera.

I searched the web for new wireless systems for consideration in near future. And I got some info from Gothamsound. LT Wideband bodypack Transmitter: 1,199.00 LR wideband bodypack Receiver: 1,189.00 LMB Wideband bodypack Transmitter: 829.00 Maybe some changes when on sale??