Rafael

Thanks to all!!! sorry about the delay I couldn’t do it before I was following your instructions with grate results The 100% merino wool underwear and socks are crucial because work on a good way when you sweat. Its a good thing to get air trapped inside your clothes and shoes gloves etc The equipment it’s working normally ! Batterie’s life isn’t doing anything crazy maybe just discharge a little bit faster than usual I also made a 6mm neopren cover for wrap the entire bag and some pouches (when it’s blowing becomes freezing) and there are some snow storms. Is it’s possible to loose some RF signal strength when to much snow like in a mountain ? thanks again!!!

Hi everyone Thanks for your help ! Very important for me! really appreciate it. I'm going to stay for 2 weeks on February and its a kind of documentary a 3 people crew, sound camera and director. The idea its to shot on any kind of scenarios, we have some days outside, on islands, fishing boats, northern lights, wild 10000 Reno _red-noses?, and also warm beautiful interiors, and car[s interiors too I'm not sure how much will be shooting outside, thinking about to be prepared for the worst scenario. My focus its on battery life, specially the NP50 ones and my clothes. Diving now on the web around your recommendations!!! Thanks for that!!! And thinking to go with 1 Nomad 3 qrx200 + mic plexer WIP antennas tuned on *Block23_?? 2 zmt4 2 zmt3 2 trxla2 sanken and dpa4063 erx3tcd for cameras and director Cinela Piano MS (mkh416+CCM8) + 3 external cables. CCM41 for interiors 2 camara mic Daity pro *no idea if will survive 4 eSmart 98 batt + audioroot disto np50bat + eneloop pro Thanks again and sorry for my poor English.

Hi ! I'm about to shooting in north Norway any one know if are there any restrictions on frequency ranges? I'm ZMT's 4.5 and 4.6 and QRX200 user Thanks! Also any tips about work at -30c are welcome I'm from South America so it'll be my first time on the arctic weather already read a good thread here thanks again!

I have exactly the same problem, have you solve it? any news? thanks !!

Hi I’m about to do the next thing. I would like to modify my eSMARTG BG-DH power disto in order to feed it with an Aton Bauer VCLX I'm thinking to solder XLR4pin’s Male/female between the eSMART socket conector and the distributor To still using the eSmart bag batteries when I need any one has tryed something like this ? Any advice thanks!!

Hi Trey, I like mine !!! but it,s broken unfortunately. I'll like to check before buy the second one if there are relevant differences on new models or brands, just checking.

Hi! I need to buy another AMP for my zaxnet, I was using an Sunhans esunrc 3000 mW 2.4 GHz Just want to know if someone have a better alternative to this I seen there are other models on amazon, any advice? Thanks!

Zephyx have a removable basket, so you can use it naked, inside cars, interiors or reduced spaces, piano or pianissimo have fix basket. the vertical distance is not a problem. I'm a Zephyx ccm ms user for many years with amazing results on the field, incredible wind protection. fully recommended !! Cinela also has an excellent customer attention , you can contact them for any replacement parts or doubts also they have _Kelly_ for rain situation something useful for designers. the very best!!

+1 Jay Rose completely agree ! there are a lot off possibilities on glass fiber panel cut it, frame it and please cover it with something neutral grey, withe or black options to make photographers happie. share with you some tech data Safe use instructions lana-vidrio-eng_0(1).pdf

Hi my kit it’s all Zaxcom and also block 23 I bought a used block 23 plexer one For 400CAD on very good shape if you are using only block 23 it’s not expensive and you have filters I also use hi and low freq zaxcom tx both of them on block 23 (on the overlapping frequencies) I’m happy and was a cheap solution. Sorry for my English Tha very best for you!!!

Thanks! Unfortunately we are going alone it’s a very small documentary I also needed a replacement part for my zephyx ccm MS so finally I bought everything from udiosence and shipped to one person on Milan thanks for the info the very best

Thanks to all I already tried with Nagrit with some lucky they answer my mail, very kindly they only can send it by DHL to the near deposit of DHL I'm not sure to have a car or time to go I´ll need the buy the boom in advance because i´ll go directly from the airport to the village? a friend ask my for one for him and its a favor (so i will travel without mine) I suppose it will be cheaper to find a local dealer. I´m wrong? going to try with the others thanks a lot! the very best

Hi I´m about to travel to a small town near to Milan (3 hours) Italy I´ll need to buy a boom pole there, and also like to have a audio store contact for expendables or any inconvenience etc etc any recommendation ? will be awesome if can buy by phone or online and they shipping to the small town. I'll be 4 weeks there I´m looking for AMBIENT QXS 580 or GB2551L from Gitzo (Italian) Sorry for my English, thanks for reading ! The very best! Rafa

Thanks!!

Hi where did you get it ? Thanks

😂 true true but sounds like no other the mixer it's also an small option

hi I think what you want it's provided from aeta on the mixy (3 chnls analog digital mixer ) The outer concentric control (of channel 2) provides +/-5dB adjustment of the balance in L/R mode (normal stereo), or the stereo width in M/S mode http://www.aeta-audio.com/fileadmin/downloads/pdf_uk/manual_mixy.pdf on the aeta 4 minx 6dB on the fader 2 http://www.aeta-audio.com/fileadmin/downloads/pdf_uk/manual_4MinX.pdf

+1 I had one !

isn't the recorder’s body the ground plane of the antenna system ?

was using audioroot BG-DH MKII power distributor and eHRS4-HRS4 regular power cable

Excelente!!!!! some advices from my experience The Audioroot eLC-SMB charger features a battery wake-up function for fully depleted batteries..... but the first time doesn't worked to me the Audioroot dual charguer wake-up function worked fine!! other thing... can't power up my nomad with 45Wh audioroot with regular cable from Audioroot: NOMAD from Zaxcom are fitted with very large capacitors in their internal power supplies. When switching these units ON a very high inrush current occurs because of these capacitors. This inrush current is high enough to make the eSMART Li-45wh battery protection trip. This protection circuit is rated at 4A with inrush current capabilities of 10A for 31ms and 20A for 427us. Your problem can be solved by using a current limiting cable. We can provide this cable under reference eHRS4-HRS4-2.0 or eHRS4-OUT-5.0 depending on your setup (ie if you are using a power distributor to power your NOMAD). If you are used to building your own DC cables you can also simply build and HRS to HRS cable with a 1ohm resistor in series to power your NOMAD. The resistor will act as a current limiter and correct the issue you are currently experiencing. The very best!

So ! what's my output power ? always 75mW ? Fixed thanks

HI me too in an older version (V2-14) It's looks like it's working. at least they react at the same way of TRXLA's I'm confuse, it's working on the screen but not on the output power? How can I measure the output power? Thanks WhatsApp Video 2017-08-11 at 17.55.56(1).mp4 sorry for my poor English

thanks !

thanks all. the block 23 on micplexer2 it's on position 3, 582.5-617.5 center freq 600Mhz on my QRXs scan limit 590-614 should I think on a block 23 micplexer1? what do you recommend for run 4 systems ? on xr or stereo or mono (400Khz spacing) I'm used to work on quiet rf environment . plexer 1 or 2 ? can't find plexer1 user manual the best