Jump to content

Dan Savio

Members
  • Posts

    12
  • Joined

  • Last visited

Profile Information

  • Location
    Peru
  • About
    Sound man.
  • Interested in Sound for Picture
    No

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hello thanks for your message. Well I only need to power the Azden, and I don't have much space in my bag so I think my best option would be a slim or smaller battery but that can power more than 6 AA batteries. I have a sound devices 633 that perhaps I could also power with this battery in an emergency but i will prefer to focus more in the Azden. Please, if you could give me some examples of this type of batteries, I would appreciate it, my budget can reach up to 100 Many thanks
  2. Hello, maybe someone here knows how to connect an external battery or power bank to the Azden FMX-42a? Azden FMX-42a has a DC in 10.5V -17V PIN4 = (+) PIN=(-) Locking 4-Pin Hirose connector. Any idea? Thanks
  3. Hello, thank you very much for your message, it is good information. I hope in the not too distant future to be able to fix the 633. For now I think that my Azdem FMX-42a is doing a very good job as phantom power and mixer, or what do you think of this configuration? What I'm thinking now is another way to power the Azdem FMX-42a (I use 6 AA rechargeable batteries) because it has a 4-pin Hirose connection, any recommendations? a power bank? or an external battery? thank you so much
  4. Hello Mungo , thanks for your message. For now I am using my Azdem FMX-42a mixer which has phantom power, what do you think¿? Which external phantom power could you recommend? sound devices service is very expensite they tell me: The labor rate for the 633 is $795 plus shipping, parts, and tax duties. i think is just too much. any another advice please many thanks
  5. hello does anyone know independent repair shops in NY or NJ ? (or near these states) the phantom power of my Sound Devices 633 dont work anymore. thanks
  6. hello does anyone know independent repair shops in NY or NJ ? (or near these states) thanks
  7. so it is very likely that it is a bad contact? I am still looking for the right person to fix it, I do not want someone who ventures to disassemble a 633 without prior knowledge, I hope to be able to communicate the results soon, hoping that they are positive. all the best
  8. Hello, thank you very much for your message, it gives me hope! If you have data from any diagram of the 633 or any data that could be useful for the technician when it comes to repairing it, I would appreciate it! all the best
  9. Hi thanks for the replay, yes the DPA and my cables works perfect with another recorders. The weird thing is that the NTG3 works on the 12V Phantom Power option but it doesn't work on the 48V Phantom Power option. Also when I switch from 12V to 48V Phantom power I can hear for a second but then the sound fades away. I have already written to Sound Devices, they tell me to send the 633 but as I explained in my message, I live abroad and it is very difficult and very expensive to send it to the USA.
  10. Hello everyone, I hope you are well. I have this problem: The phantom power of my 633 does not want to work, it always works without problems, it has not been hit or anything, I always take very good care of it. All other functions work perfectly, the TA3 and XLR inputs work with wireless microphones without problems (Sennheiser G4). The phantom power only works on 12V with a Rode NTG3 microphone but when I connect a DPA microphone it does not work on either 12V or 48V. I have measured the XLR inputs (1,2 and 3) with a multimeter and it shows 10V when it is in 12V phantom mode and it shows 4V when it is in 48V phantom mode. I've done a hard reset followed by a flash reset, reinstalled the firmware, formatted the card and nothing still doesn't work phantom power. If I were in the USA, I would surely send it to Sound Devices to fix it, but I live abroad and it is very difficult to send it. Has anyone had this problem? Any recommendation? Any information will be very helpful. Thank you very much to all. Greetings
  11. Hello, could someone put links to SD and CF cards that work perfectly with the Sound Devices 633. I would really appreciate it. I ask because they put cards on their website that are no longer easy to find. thank you so much
×
×
  • Create New...