heckcareder

I have a bunch of 4061 but recently I have been using alot of Tram TR50 and OST 801 for the projects. As much as 4061 sounds awesome, i find that the cable stiffen too much after about 2 years of usage. And also, I am starting to hear hiss at higher gain. Thus i only use 4061 for higher end projects. My oldest tram and ost is around 6-7 years old as of now. And their cable is still very very good! I can crank up the gain if i need to and there is no hiss. Its also excellent in very loud environments. It has become my go-to mic once again and I am loving it!

Hey! Did u manage to do a 3d modeling of the adapter? I'm thinking of changing my the lyre to a slightly bigger one.

happened to me years back. return's 3.5mm had issue with connection. sent back to mothership to get it replaced.

So far no sagging. Been quite good since I placed the boxes below. are you still using that bag?

Hey Jon. I am also using the same bag and I like it. What I did is that i taped 2 empty boxes that came with the dpa lav and slot it under the mixer. This elevate the mixer for a very nice height.

Add a little bit of solder to the two prongs. It will last you for quite a long while.

Betso tcx2 just arrived not long ago. Haven't use it on set yet but did a battery test yesterday. 10 hours in and battery only drop 1 bar. Sent from my iPhone using Tapatalk

For the battery door, are you referring to TCX-2 or SBOX-2RF?

beautiful! excellent idea!

rado, is that the PS607? if it is, wow! you managed to stretch it by quite a fair bit! hahah!

From 8.5kg for a 3 channel wireless on my previous bag setup to 6.2kg on this bag! My sore and aching back will thank me soon!

Did u also get the ktek harness?

how u did manage to use uh400a on 211? I can't seem to use it even though my freq are the same.

I have the 4061 and I realized it works well on certain voice. And also it sounds nicer if you tape it to the collar of the tshirt where it's more "open". Hiding the dpa in the chest area don't usually sound as good to me though.

This is not just another sanken vs dpa thread. But rather, just curious to see how many of you prefer lav which currently. DPA has gained quite a fair bit of interest in these few years and I do know that a lot of you guys have shifted over to dpa. Just wanted to know who still prefers what and why?

Mine was slightly different from yours. TX has audio signal but not sending the signal out to RX. RX just shows mute send for servicing. Circuit board problem

Hi guys. Just got my 411 and was testing out the difference between the 411 and my previous 211. I noticed the sound quality difference between 211 and 411. I do know that 211 is analog and 411 is digital. But I never owned a digital before so there's nothing that I can compare to. To me, 411 sounds a little more bassy and just slightly airy (and of course quieter) compared to 211. Both are using dpa 4061. So the end question is, does analog and digital make any difference to the sound quality (I do know that 211 sounds warmer) ? Or is it I am just over thinking? Also, I find that the uh400a doesn't sound as good compared to wired and G3 2000 series. I tested it on mkh416 and oktava. Both sounded a little too muddy. Is there anything I am doing wrong for the uh400a?

Hi guys. Just got my 411 and was testing out the difference between the 411 and my previous 211. I noticed the sound quality difference between 211 and 411. I do know that 211 is analog and 411 is digital. But I never owned a digital before so there's nothing that I can compare to. To me, 411 sounds a little more bassy and just slightly airy (and of course quieter) compared to 211. Both are using dpa 4061. So the end question is, does analog and digital make any difference to the sound quality (I do know that 211 sounds warmer) ? Or is it I am just over thinking?

any chances of coming up dashboard for 411/211 on 633?

Thank you for your reply! I wont be doing the soldering myself. Will get the usual shop who does all my soldering to do it. Does it mean that I have to mod my current cable? Which is switchcraft (dual batt sled) to 4 pin hirose (batt bud)? Or where does the cable from the voltmeter go to? Sorry, just a little puzzled of which cables goes to where.

probably a silly question. but if i were to buy this voltmeter, how do i attach it to my bds ? http://www.ebay.com.sg/itm/Red-LED-Digital-Volt-Meter-DC-3-5V-30-V-For-9V-12V-24V-USA-SELLER-A177-/231314054907?hash=item35db645efb:g:5lUAAOSwxCxT93rY My current setup is : - Sound guy solutions dual sled (switchcraft) -> battery bud II (4 pin hirose) Where should the 2 wire be attached to? I am not good with soldering and all these wire stuff, thus the question.

yeah same here. I love the material of how cooling it is. But I still feel the load over my shoulders rather than on my hips/waist. And the bucket of the orca is just a little too big and annoying. Keeps pressing against my stomach. Now I use my portabrace shoulder strap (the thick one that comes with the mixer bag) and it goes around my back, just to give it more support. anyone else facing the same issue?

hey Gordon, how did u look it up?

okay cool! that explains. Thank you very much!

Hi guys, I am planning to purchase a 411a from a seller online (not from this forum). He sent me a couple of pics but I was wondering why the large flat surface of his 411a says "Lectrosonics Digital Hybrid Wireless" and not the standard "Lectrosonics UCR411a"? Could it be an earlier design of lectro 411a?