dougafresh

Hey folks! I'm trying to figure out the best Zaxnet antenna for my Nomad. Seeking the best compromise between (1) decent signal range (2) unobtrusive form factor in the bag and (3) minimal stress on the Nomad's antenna mount. I've been using an antenna that's ~4 inches sticking straight up (pictured), but have had some issues with my bag and harness putting pressure on it, causing the mount to loosen. Would appreciate any advice. Thanks!

Has anybody tested the battery life of the ZMT3 in "record only" / "NOTX" mode? Thanks in advance!

Hey everybody! First-time poster here. I'm having some trouble getting rec-run timecode to trigger internal recording in my ZMT3 transmitters. I had believed the important ZMT3 menu setting was this one: Extended Menu > Timecode Menu > TC Jam Mode > Auto-Load Rec Run My ZMT3 transmitters are all set to the same Zaxnet frequency, in the "RX" Zaxnet mode. They are correctly displaying TC that is being sent by an IFB200, but starting / stopping the TC doesn't start / stop the recording. The IFB200 is receiving timecode via BNC from a Canon C300 Mark II camera. I have the camera set to rec-run mode, so the TC only rolls when I hit record on the camera; otherwise the TC remains frozen. I have also put the IFB200 into "Transmit TP Mode," meaning that if the IFB200 is recording, then it sends a record command to the ZMT3's. This currently is working. I'd really appreciate any help you can give me. Thanks so much in advance!