Search the Community
Showing results for tags 'MM400'.
Found 3 results
-
Is the Lectrosonics WM tx still watertight when used with the ACOAXTX remote antenna? Does the sma connecter in the antenna have an o-ring or something to stop water entering? If not, how is the standard antenna made watertight?
-
Hey guys, I just received a second hand Lectrosonics mm400c today. I put a brand new battery in and tried to power it up, but had no success. Long story short, here are some steps I found useful for a possible quick fix. If the LEDs do not turn on then chances are the switch is to blame. The housing of these units is fully enclosed and power on is done with a magnetic button through the outer wall (waterproof design). Sometimes magnets might fall too far out of alignment and need to be sent in, but give this a try before the hassle. Picture 1 shows the magnet switch at off. Slide it to the middle where you will see to nubs that hold the button in tact expose (picture 2). Use tweezers, or something similar to pry the button out of the middle (picture 3). Now proceed to clean all the grooves from possible dirt or erosion, and place the button back in. I found in my case, there was just enough crud to prevent the sliding power switch to fully reach the on position. Hope this helps. Cheers!
-
Just letting everyone know that we have added a new adapter to our inventory specifically for the Lectrosonics MM wired Lavalieres. Here is a video on the new product!
