Search the Community
Showing results for tags 'earwig'.
Found 2 results
Phonak with a Lecto R1aI have a project coming up where talent will need in ear monitoring with an earwig. I know that different discussions on this topic have been discussed before, but I'm not finding my answer. Can I use a Phonak with a Lectrosonics R1a using some kind of neck loop? I'm thinking that the R1a will give me a better range than the Comtek. Have any of you used an earwig in this way before? Or is there another way to get good range with the Phonak? Any advice would be much appreciated!
Hi my union talent is at his wits end with the invisity, and I don't blame him. When it craps out with solid white noise, only pulling it out, twisting it again, and saying a prayer will give you an arbitrary bit of time before it craps out again. Inevitably during a take. I've tried Phonek's contact, technical support, their US 800 number, which only covers their transmitters, and even their facebook messenger. No response. I've also done the google search for this site as well as the production audio google group. I might add: we're on a stage not unlike a freight container. The top and all 4 sides are panels of leds and props, ribs of steel. Also, you might find it interesting to note that the earwig is measured to work 13 hours off a single battery. We were superstitious at first and swapped out the batteries. I've hovered the antenna within 15 feet of the user, while the transmitter remains anywhere from 20 to 30 feet from the talent, (and 40 feet from the antenna) depending on where in the tube the talent is standing. Also of interest, our mixer just walked the full set, touched everything, has kept it in for the last 35 minutes, walked out to our reception/holding, and workshop area, all of which is well outside the recommended range for the device, and the earwig hasn't acted up once. Our talent is not a particularly sweaty person, to the contrary, he's as buff as an astronaut. Intrigued? Read on: Hi, your FAQ contact is still throwing an error: Greetings! This will be the second time that I have submitted this inquiry. A few things I might add: 1) read the FAQ mentioning that occasional hiss is normal. I don't understand how a PTT system would make this better-we are using a shure mic sm58 with a PTT system going into a BST-25, and we still get a hiss. Pressing the button and talking again has not made the problem go away. 2) this is the second invisity that we have received and we are experiencing the same behavior. 3) we did do a frequency scan for our area and our mixer toasted the invisity this morning with the PC software-the next day clearly confirms that he picked a frequency that is permitted with the transmitter, but this is an area I do not fully understand. I think it was Channel 42. Can you help us choose a reliable frequency, and now that we have two units, would you recommend we use the same frequency on both, or use a separate frequency as a backup? Please do read the full description such that you know what I have tried or understand Technical Support: We are currently on-set with a union feature film. Our primary talent is experiencing full white noise static through an invisity received from a BST-25 Transmitter. When it happens, which is on average very 10 minutes, between rehearsals, etc, the peoples can be temporarily remedied by changing to the other gain setting or even turning it to the 0 position. But even in the 0 position, I have noticed that the static comes in. The sound masks all incoming signal, which we are sending through a dynamic microphone. That is, the signal does not interrupt the hiss. The bst-25 is on Channel 14 16.337 The antenna signal between the '3' and '7' The earwig is set to channel 14 216.3375 I am going from a sticker on the earwigs case. We toasted it to Channel 42 16075 Could you help me troubleshoot the static problem? We are using a Lectro SNA-600 antenna which I would be grateful if you could confirm my extended length for each arm to be 29.7cm. Is that correct? Thank you so much for your support, and I can reply with images and further details if I receive an email from you. All the best, James