Hi All,
I need get a custom cable made to adapt the TA5f return plug of my Nomad umbilical to the unbalanced 3.5mm return input of other mixers such as 552 etc.
The Nomad return input pin out is as follows.
Pin 1 - Ground
Pin 2 - Channel A (Left) ( + )
Pin 3 - Channel A (Left) ( - )
Pin 4 - Channel B (Right) ( + )
Pin 5 - Channel B (Right) ( - )
Is it fine for me to leave 2 of the pins on the adapter cable's TA5 male not connected?
Like this:
TA5m Pin1 _ Gnd _ Sleeve
TA5m Pin2 _ A(+) _ Tip
TA5m Pin3 _ nc
TA5m Pin4 _ B(+) _ Ring
TA5m Pin5 _ nc