Robbie Leppzer Posted February 5, 2012 Report Posted February 5, 2012 I'm recording now with the Nomad and when I press stop, I get a False Start page, which only gives me three options: mark , delete or cancel. When I press mark, the recording continues. When I press cancel, the recording continues. I'm afraid if I press delete, my files will be deleted. What do I do to stop the recording and safely save my files? As I'm currently recording (Sunday, 2:40pm ET), I don't know what do except turn the power off to stop the recording, and I'm afraid if I do that my files will definitely be lost. So, I would appreciate some immediate answers if possible, as I have about 8 hours until my card is full. Robbie Leppzer Turning Tide Productions Quote
Michael McQueen Posted February 5, 2012 Report Posted February 5, 2012 i usually press and hold stop to stop a recording. Quote
Jack Norflus Posted February 5, 2012 Report Posted February 5, 2012 Don't hit delete. If you pull power the MARF format will cover you till the moment you pull power - so everything you recorded up to that point will be fine. Quote
glenn Posted February 5, 2012 Report Posted February 5, 2012 We will have this fixed tomorrow. It is OK to power down. Marf will recover the file to the point of the power down. Glenn Quote
Max Dumesnil Posted February 6, 2012 Report Posted February 6, 2012 Glenn, is this something with the latest version? Quote
Jack Norflus Posted February 6, 2012 Report Posted February 6, 2012 As far as I know this is the second user who just reported this issue - where after hitting stop Nomad will go into the false take screen instead of stopping recording. This doesn't happen every take or is even repeatable in any sort of pattern - it is a very random occurrence. But regardless it is a software bug. This should easily be correctable in software. In the mean time if you happen to experience this - it is OK to power down Nomad and all your recordings will be safe till that point. Quote
paul55 Posted February 8, 2012 Report Posted February 8, 2012 can not get Tone on TC slate to work. Have tone out to camera but nothing when using the time code freeze frame. Quote
glenn Posted February 8, 2012 Report Posted February 8, 2012 This problem is now fixed. A new version will be released tomorrow. Glenn Quote
RadoStefanov Posted February 10, 2012 Report Posted February 10, 2012 Good to know. I noticed the same problems with my Nomad. Good I am still testing and not working. Quote
cfp Posted February 11, 2012 Report Posted February 11, 2012 can not get Tone on TC slate to work. Have tone out to camera but nothing when using the time code freeze frame. I have the same issue. Quote
Christian Spaeth Posted February 11, 2012 Report Posted February 11, 2012 so when is the software update coming? Glenn's Feb 8 post said "tomorrow", now it's the 11th and it's still not up - or is it? version 2.76d http://www.zaxcom.com/downloads/Nomad_v2.76d.zip Quote
glenn Posted February 11, 2012 Report Posted February 11, 2012 Tone beep on time code slate will be addressed next week. Glenn Quote
RadoStefanov Posted February 11, 2012 Report Posted February 11, 2012 This is not the new one. so when is the software update coming? Glenn's Feb 8 post said "tomorrow", now it's the 11th and it's still not up - or is it? version 2.76d http://www.zaxcom.co...omad_v2.76d.zip Quote
Jack Norflus Posted February 11, 2012 Report Posted February 11, 2012 This is not the new one. 2.76d is the newest release software available. Quote
studiomprd Posted February 11, 2012 Report Posted February 11, 2012 " Good I am still testing and not working. " will you be taking over for Jack next week ?? Quote
RadoStefanov Posted February 11, 2012 Report Posted February 11, 2012 2.76d is the newest release software available. I meant it is not the firmware glenn is talking about. Sent from my HD7 T9292 using Board Express Quote
Jack Norflus Posted February 11, 2012 Report Posted February 11, 2012 I meant it is not the firmware glenn is talking about. Firmware 2.76d fixes the false start issue. Though it doesn't add the bloop tone in the slate. 2.76d also adds a Transmit/Receive mode to Zaxnet Quote
RadoStefanov Posted February 11, 2012 Report Posted February 11, 2012 My nomad is 2.76d. The false start happened once but I kind of forced it to. I was experimenting with different mirroring and suden lost of power. It has not happened since. Firmware 2.76d fixes the false start issue. Though it doesn't add the bloop tone in the slate. Quote
Jack Norflus Posted February 12, 2012 Report Posted February 12, 2012 My nomad is 2.76d. It happened once but I kind of forced it to. I was experimenting with different mirroring and suden lost of power. It has not happened since. You shouldn't change recording parameters while recording. Quote
RadoStefanov Posted February 12, 2012 Report Posted February 12, 2012 (: Sorry. I really wanted to experiance MARF. I was a virgin you know. (: You shouldn't change recording parameters while recording. Quote
Christian Spaeth Posted February 12, 2012 Report Posted February 12, 2012 just turn off the machine while recording. That's MARF. Though now that I guess you already "did it", it won't be that revealing anymore... Quote
Jack Norflus Posted February 12, 2012 Report Posted February 12, 2012 Sorry. I really wanted to experiance MARF. I was a virgin you know. Was it good for you? Quote
RadoStefanov Posted February 12, 2012 Report Posted February 12, 2012 Was it good for you? Nobody forgets the first time. Sent from my HD7 T9292 using Board Express Quote
studiomprd Posted February 12, 2012 Report Posted February 12, 2012 ... but be careful, you don't want to get "in trouble"... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.