Lectro UM195 with R1a for IFB

[Parker Brown]

Hello all,

A quick question. I have a Lectro UCR195/UM195 fixed frequency system that I'd like to relegate to IFB duty. The UCR works well in video village and I'd like to add some R1a's to the mix. The system is tuned to 494.35MHz and I'd like to know if R1a's in Block 19 tuned to 494.3 (4F) or 494.4 (50) will work with the UM Tx. Does the half a tenth of a MHz matter? Any potential issues with this idea?

Thanks,

Parker

[LarryF]

No worky. The UM195 can't do narrow band IFB. IThe 195 has no pre-emphasis and is a dual band companded system. The IFB has no DSP and can't emulate the UM195/UM200 wideband processing.

Best,

Larry F

Lectro

[Parker Brown]

Thanks Larry,

This mean that R1a's only work with 400 series transmitters?

Parker

[LarryF]

Thanks Larry,

This mean that R1a's only work with 400 series transmitters?

Parker

And the original T1 transmitter.

Lef

[VASI]

And the SMQV or SMV they can't for IFB?

Because in the manual wrote:

Compatibility Modes (6): Digital Hybrid Wireless (400 series), 200 series, 100 series, Mode 3, Mode 6, IFB

[LarryF]

And the SMQV or SMV they can't for IFB?

Because in the manual wrote:

Compatibility Modes (6): Digital Hybrid Wireless (400 series), 200 series, 100 series, Mode 3, Mode 6, IFB

They also work with the IFB. I just and'ed the IFB T1 since it was an analog unit that worked with the IFB. All digital hybrid units work with IFB.

Best,

Larry Fisher

Lectro.

[VASI]

Thank you Larry!