bendybones Posted August 3, 2012 Report Share Posted August 3, 2012 Now that my Nomad is having it's power switch repaired, it's time to invest in some kind of remote switch.... juuuuust in case.... Anyone have any recommendations? Currently powering Nomad is a Hawk-Woods shoe with a single hard-wired hirose4 (worryingly vulnerable), while my G2s/G3s are on AAs. Thing is, if I am looking at paying nearly the same for a switch as I would a switched distro, I would go with the distro for future proofing, seeing as I will eventually buy/borrow Zax or Lectro radios. Any thoughts? Quote Link to comment Share on other sites More sharing options...
Chase Yeremian Posted August 3, 2012 Report Share Posted August 3, 2012 Well I use a BDS4for bag power and that has a power switch for all the goodies hooked up. Or am I missing your point? Quote Link to comment Share on other sites More sharing options...
jason porter Posted August 3, 2012 Report Share Posted August 3, 2012 Adding a switch to a NP-1 cup shouldn't be much of a problem. Quote Link to comment Share on other sites More sharing options...
Nate C Posted August 3, 2012 Report Share Posted August 3, 2012 I power my Nomad, 2x SRAs and 2xUm400a off of a hawkwoods cup (all on lemos) no problems. Before getting the nomad a couple of weeks ago, the hawk woods cup had been powering a 442 and other various RX/TX combos for the past 5 years. Never have i thought of the Lemos as vulnerable. The NP1 cup version i employ has two switches, which I have never used as the cup is buried at the bottom of my bag. Just pull the battery to power up and down. Cheers Nate Quote Link to comment Share on other sites More sharing options...
bendybones Posted August 3, 2012 Author Report Share Posted August 3, 2012 Adding a switch to a NP-1 cup shouldn't be much of a problem. This could be an excellently inexpensive option. I'm not too clued-in with electronics tho, what should I look for in the switch component. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.