Jump to content

Recommended Posts

Posted

I did an interview yesterday and I had this recurring problem every 2-5 minutes or so. It was always the same: 5 quick pulses of the high noise, under his voice, but it seemed to be amplified when the speaker increased his volume, leading me to think it's a problem with the lav or the transmitter.

I'm using Sanken COS11-D's wired for Lectro, with an adapter to the Sennheiser G3's. His receiver was going into input 2 of my 552 out of the direct out line level pre-fade to input 3 of the 744t. I have never experienced this problem before, and I use these same pieces of equipment on a very regular basis. Any ideas what it could be?

sample.wav

Posted

For stuff like this, all you can do is punt. If it's a sitdown interview, hope that you have a wired adapter and can just hardwire it in the mixer. What happens if you try a different microphone?

If the signal is being driven into oscillation, there could be all kinds of potential causes, everything from mike to transmitter to receiver, even localized interference.

Posted

I hear it, it's right at 4.75k, and maybe something at 3.18k. If you drop the file into something with a spectral display, it's right there. It's really subtle and should be easy to fix.

As far as the cause, I dunno. Sounds like RF nastiness to me. If I were getting the files to post, I'd thank you, they sound much better than the stuff I've been "fixing" all day.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...