Jump to content

4 Separate Audio Channels to XDCAM PDW 700


Jedson13

Recommended Posts

I do it all the time.

I send four AES/EBU digital audio channels via my Lectro D4 system.

Channels 1 and 2 go in XLR 1 and channels 3 and 4 go in XLR 2.

Set the rear switches located just above the XLR plug to the middle setting (AES/EBU) and make sure the side audio settings are set to "rear".

No need to worry about the gain dial settings on the side. The digital signal bypasses the gain settings of the analogue inputs.

If you don't have the D4, you can hardwire to the camera, but you need the source signal to be AES obviously.

I've never tried going in through the 5 pin XLR on the front.

Link to comment
Share on other sites

I do it all the time.

I send four AES/EBU digital audio channels via my Lectro D4 system.

Channels 1 and 2 go in XLR 1 and channels 3 and 4 go in XLR 2.

Set the rear switches located just above the XLR plug to the middle setting (AES/EBU) and make sure the side audio settings are set to "rear".

No need to worry about the gain dial settings on the side. The digital signal bypasses the gain settings of the analogue inputs.

If you don't have the D4, you can hardwire to the camera, but you need the source signal to be AES obviously.

I've never tried going in through the 5 pin XLR on the front.

+1

Awesome easy setup.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...