RPSharman Posted September 21, 2012 Report Share Posted September 21, 2012 Going paperless! What do you use and why do you like it versus the other one? Thanks Quote Link to comment Share on other sites More sharing options...
larry long Posted September 21, 2012 Report Share Posted September 21, 2012 I use movie slate and I love it Quote Link to comment Share on other sites More sharing options...
soundslikejustin Posted September 21, 2012 Report Share Posted September 21, 2012 Movie Slate user here, very good. Quote Link to comment Share on other sites More sharing options...
Jason A Posted September 21, 2012 Report Share Posted September 21, 2012 I use Sound Reporter. Not familiar with Movie Slate. Just getting ready to utilize the the timecode feature which will allow me to have each takes start/end match with my nomad meta data. Haven't run into any roadblocks regarding needed features. Very expandable. Quote Link to comment Share on other sites More sharing options...
Michael P Clark Posted September 21, 2012 Report Share Posted September 21, 2012 Can't go wrong with MovieSlate, far more features then what I can tell with Sound Report Writer. It is more expensive, but the service, and feature set is amazing. Quote Link to comment Share on other sites More sharing options...
Shastapete Posted September 21, 2012 Report Share Posted September 21, 2012 I've been using SRW now for a few months and I like it, some parts are a little less than intuitive, but it gets the job done for me. Since my kit is based on the DR-680, timecode isn't something I've really had to worry about. It works well on my iphone, but in the future when I upgrade to a TC recorder and convince myself that I really do need an iPad, I'll likely switch to MovieSlate Quote Link to comment Share on other sites More sharing options...
afewmoreyears Posted September 21, 2012 Report Share Posted September 21, 2012 Sound report writer works great.... have used it for a while now..... no gripes..... Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted September 21, 2012 Report Share Posted September 21, 2012 Wave Agent. phil p Quote Link to comment Share on other sites More sharing options...
RPSharman Posted September 21, 2012 Author Report Share Posted September 21, 2012 Wave Agent. phil p For iPad? Sorry I wasn't clear. Not using a laptop. Quote Link to comment Share on other sites More sharing options...
Phil Palmer Posted September 21, 2012 Report Share Posted September 21, 2012 Movie Slate user here. Been very happy with it and with the user support. Cliff at PureBlend software has been very quick to address requests and problems or issues. Quote Link to comment Share on other sites More sharing options...
Richard Lightstone, CAS Posted September 21, 2012 Report Share Posted September 21, 2012 Ditto on MovieSlate and there is an enormous thread on it, here Quote Link to comment Share on other sites More sharing options...
RPSharman Posted September 22, 2012 Author Report Share Posted September 22, 2012 Thanks for the link, Richard. I remember reading that before. But I was hoping to hear from some SRW users too. Movie Slate seems feature rich, but I don't want another button to push as I go. I really want to enter stuff later and "catch up" like I currently do on paper. Not sure TC entry is a feature I want or need, especially if I have to manually edit a value after the fact. I know I don't have to buy that feature, but I think I would like something more simple. Quote Link to comment Share on other sites More sharing options...
Richard Lightstone, CAS Posted September 22, 2012 Report Share Posted September 22, 2012 Robert, you can operate that way with MovieSlate. Just use it in "Data Only Mode". No Timecode is part of the setup, and you can create the "History", thus you report when you want. Quote Link to comment Share on other sites More sharing options...
RPSharman Posted September 22, 2012 Author Report Share Posted September 22, 2012 Nice. Thanks. It seems like a more comprehensive program I can grow into. The interface looks great too. SRW is only $20, so I guess I could give that a go and change my mind later at a minimal cost. Won't need either until a bit later in the year. Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted September 22, 2012 Report Share Posted September 22, 2012 I wish SD would port Wave Agent to i-devices. phil p Quote Link to comment Share on other sites More sharing options...
Jeff Wexler Posted September 22, 2012 Report Share Posted September 22, 2012 I am a MovieSlate user but I do have Sound Report Writer. I have to admit, I can't even figure out how to use Sound Report Writer. It seems to be just a text template that provides the means to compose a printable report document. Quote Link to comment Share on other sites More sharing options...
larry long Posted September 22, 2012 Report Share Posted September 22, 2012 Movie slate is so customizable, use the fields and features you want and leave the rest. It creates a very nice report. I bought the TC option and I am using it but I don't include the TC fields in my report. I recommend it. Larry Quote Link to comment Share on other sites More sharing options...
Tyler Faison Posted September 22, 2012 Report Share Posted September 22, 2012 I am a MovieSlate user but I do have Sound Report Writer. I have to admit, I can't even figure out how to use Sound Report Writer. It seems to be just a text template that provides the means to compose a printable report document. Jeff, I'm sorry to hear Sound Report Writer gave you some trouble. Admittedly, it's sole purpose is to create a sound report at the end of the day, which is why you won't find as many bells and whistles as MS. There are shortcuts built in that allows you to use very few touches to get through the day. Maybe it's been updated since you last tried it? I have far fewer resources than PureBlend, but am always trying to make it better however possible. Feel free to PM me, email me, or visit the existing Sound Report Writer thread to add suggestions or comments. Not gonna hijack this one. With that said, I'm a big fan of my CL-WiFi and Wave Agent combo. Depends on the type of shoot, IMHO. Quote Link to comment Share on other sites More sharing options...
Boomboom Posted September 26, 2012 Report Share Posted September 26, 2012 I looked and couldn't find a printable Movie Slate manual... anybody found it ? Quote Link to comment Share on other sites More sharing options...
Darrell Henke Posted September 26, 2012 Report Share Posted September 26, 2012 I have only used SRW. It takes some experimenting to get the report fields in the order you want them, but you can put them in any order you want. I find it fast and easy to make corrections with it if needed. I do not use any time code functions on my reports. I use it with a Deva and I can compare segments to scene numbers easily. Post likes it. Darrell Quote Link to comment Share on other sites More sharing options...
Adam Douglass Posted February 11, 2013 Report Share Posted February 11, 2013 I've been having issues with both. Sound Report Writer isn't storing timecode when I enter it manually, and MovieSlate isn't working for me at all right now (although I've used it successfully in the past). In MovieSlate, when I press the 'Roll Sound' button to start a new take, it refuses to let me, saying I haven't entered any Production, Scene, or Take info, even though I have. So for now, it's completely useless. Quote Link to comment Share on other sites More sharing options...
Tyler Faison Posted February 13, 2013 Report Share Posted February 13, 2013 We are working on a known bug that affects the manual entry and editing of timecode. After creating this app, I have a new found respect for other well-known manufacturers and the problems they face when rolling out a new product. Fun times! Quote Link to comment Share on other sites More sharing options...
S Harber Posted February 14, 2013 Report Share Posted February 14, 2013 I'm trying to figure out the point of entering all the metadata without that data entry going onto the files you record. It's cool to make nice sound reports but if the data entry never goes back to naming the files/tracks etc it seems like purely an aesthetic pursuit. The Cantar has it in Arcan and Sound Devices Wave Agent allows one to enter the metadata onto the file being recorded then you use that metadata from the files to generate the report. Otherwise, you would be reliant on the hope that the report would travel with the files. And even then hoping folks down the line look at the reports. It just seems to me that jumping through the hoops of entering this info would result in something more than just a report. Scott Harber Quote Link to comment Share on other sites More sharing options...
Boomboom Posted February 14, 2013 Report Share Posted February 14, 2013 I'm trying to figure out the point of entering all the metadata without that data entry going onto the files you record. It's cool to make nice sound reports but if the data entry never goes back to naming the files/tracks etc it seems like purely an aesthetic pursuit. /.../ Otherwise, you would be reliant on the hope that the report would travel with the files. That is exactly what I realized last night while reading deeper into their website. I was kind of mislead by the connectors page that gives you info for all the cables, connectors, etc... for different devices combined with the page that talks about ''arming tracks'' from within the app, which in fact is more like giving you the ability to replicate the workflow to comply with your recorder. I got it that I read the big lines without going into the details (doh!) about the app in the past, and speaking with post these lasts days about the needs I'm gonna have, I know I can cover everything I need with Wave Agent. PLUS, having a big meeting recently lead me to understand there's so many people involved with the files in the end that having a kind of ''separate'' report that , exactly as you said Scott, would have to travel with the files just induces one more possibility of having something going wrong with post, people managing the main server, copies, logging, etc... Movie Slate does terrific looking reports and has lots of nice features but I think my needs for the moment are below all these things they can offer. Quote Link to comment Share on other sites More sharing options...
Jeff Wexler Posted February 14, 2013 Report Share Posted February 14, 2013 I agree with both Scott and boomboom, with MovieSlate (and Sound Report Writer I imagine), it is a little bit of "an aesthetic pursuit" as Scott has said. The ideal, of course, would be that metadata could be entered easily and properly and it would be available everywhere on all devices in the hands of the people who need to access this metadata. The only metadata that is shared now (and this is a good thing) is timecode if you use MovieSlate jammed to master timecode. It is so true that "arming a track" is really just making a NOTE that you HAVE armed a track on your recorder. The problem, of course, is that each recorder handles the arming of tracks differently. It would be wonderful to be able to arm a track on MovieSlate and have it arm the track on my Deva, but what if I'm using a Sound Devices recorder, or a Cantar? The level of integration for metadata may increase in time, I don't know what progress is being made there, but extending this into the area of functional control for whatever recorder you are using seems unlikely. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.