LC21 Posted September 25, 2012 Report Share Posted September 25, 2012 I bumped into this fancy boom box system by remote audio, that has a talkback mic too. http://www.remoteaud...able_system_v2/ I was wondering if anyone could give me some impressions about it, hopefully both on wired and wireless use. Quote Link to comment Share on other sites More sharing options...
Vincent R. Posted September 25, 2012 Report Share Posted September 25, 2012 If you gonna use it wireless you need about 3 Tx -Rx sets. One for the boom, one for the return and one for the talkback. Quote Link to comment Share on other sites More sharing options...
LC21 Posted September 25, 2012 Author Report Share Posted September 25, 2012 I would be listening from the boom straight from the box though Quote Link to comment Share on other sites More sharing options...
Vincent R. Posted September 25, 2012 Report Share Posted September 25, 2012 I would be listening from the boom straight from the box though There's no mic preamp in the box, and I believe it's wired to go out first to a mixer, and the mixer provides the input to the headphone amp, via the return wires. So what you say is not gonna work out I think. Quote Link to comment Share on other sites More sharing options...
saadasound Posted September 25, 2012 Report Share Posted September 25, 2012 Been using the Boom Box on a feature with Alex Altman. I really love it as a boom op. It'll last on a rechargeable 9 volt for the entire day. Also like how it gives me my own control over my headphone level. Only annoying thing I've noticed is that in order for mixer to hear me, they have to be switched over to their slate mic/comma on the mixer end, but that is with using the CL9, so I'm not sure any other system. We also have a wireless rig that Alex made up with 3 systems... SMQV for TX, um200a (I think) as talkback and lectro IFB for comms. I also listen to boom through an MM-1. Everything powered by an NP batt and stored in a setwear bag on a belt. It's not too heavy and works pretty well, as long as all frequencies are clear of course lol. Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted September 25, 2012 Report Share Posted September 25, 2012 It's a nice rig if you want a wired boom and don't want to build your own kit. Denecke has a nice one too. phil p Quote Link to comment Share on other sites More sharing options...
Marc Wielage Posted September 26, 2012 Report Share Posted September 26, 2012 I've posted this before -- this is Sound Devices' diagram of one method of doing a wireless boom with private IFB back and forth: While I would love a convenient way to have the boom op talk to me privately, generally I can live with talking to him (or her) only via a private line, and having him respond with a nod or just talking into the boom. Quote Link to comment Share on other sites More sharing options...
soundslikejustin Posted September 26, 2012 Report Share Posted September 26, 2012 I've posted this before -- this is Sound Devices' diagram of one method of doing a wireless boom with private IFB back and forth: While I would love a convenient way to have the boom op talk to me privately, generally I can live with talking to him (or her) only via a private line, and having him respond with a nod or just talking into the boom. Aside from the fact that you must retract the boom, it's easy enough to get return (private) conversation by fading the boom out and listening PFL. That way you don't need a second tx on the boom op. Quote Link to comment Share on other sites More sharing options...
Marc Wielage Posted September 27, 2012 Report Share Posted September 27, 2012 That's true... unless you're in the middle of a take! Quote Link to comment Share on other sites More sharing options...
soundslikejustin Posted September 27, 2012 Report Share Posted September 27, 2012 That's true... unless you're in the middle of a take! Boom op talks to you during a take? I could understand during a 'reset', but wouldn't they be heard by their own mic/ everyone on set..? If not, I'd like to know your process! Quote Link to comment Share on other sites More sharing options...
LC21 Posted September 27, 2012 Author Report Share Posted September 27, 2012 So, after a lot of thinking I decided to go for just a custom modified remote audio MDR 7506 headphones with talkback mike. I want to split the TA5 connector in 2 minijacks, one for a Lectro IFB system for my monitoring and the other for the tb mike to talk to the mixer through a skanky G2 system that I have. The final question is now the following: There are 2 versions of MDR 7506 talkback headphones that remote audio does, one with a dynamic mike and another with an electret. I would go for the electret, but does anyone have any thoughts on that? Quote Link to comment Share on other sites More sharing options...
Marc Wielage Posted October 1, 2012 Report Share Posted October 1, 2012 The dynamic doesn't require power, but the electret does. I find the electret sounded a lot better, and went for that. (I think they're using a Shure whip-mike, very well-attached to the 7506.) Quote Link to comment Share on other sites More sharing options...
Glen Trew Posted October 3, 2012 Report Share Posted October 3, 2012 To help solve any confusion, I'll mention that there are three basic versions: the "Boom Box", the "Boom Box v2", and the "Boom Box SX", all of which have a push-to-talk button and use that same 2-pair starquad boom cable extensions with 8-pin Neutricon connections. The Boom Box SX has a push-to-talk button but no amplifier, and is for Sonosax and PSC PL circuits. The "Boom Box" and "Boom Box v2" both operate on a 9V battery to power an amplifier for boosting the talkback mic to line level and for providing sidetone to the boom operator (sidetone allows the boom op to hear their own voice). The Boom Box v2 also has a high quality headphone amplifier so that the boom op can control their own volume and so that the boom box can receive a stereo headphone feed or a balanced line level signal (internally switch selected). Also, the v2 can provide 5V to power eletrect headset microphones (internally switch selected). Remote Audio assembles their own miniature electret boom mic and articulated mount for attaching to commonly used headphones. Glen Trew Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.