mastermixaudiomedia Posted October 25, 2012 Report Share Posted October 25, 2012 Was doing some more configuration of the sound bag, setting up Zaxnet between the Nomad and my three TRX900AA's. One is SN1953, bought some years ago. The two newer ones are sequential SN's 3408/9 bought earlier this year. RX's are RX900S and QRX100QIFB. I have Trams setup for each TX. While testing I noticed that the older TX shows quite a hotter input level than the newer TX's for all three mics. Initially thinking it a mic problem I hooked up a XLR-3F -> 3-pin Lemo using a Shure A15TG tone generator to each TX with the same results. Has anyone else seen this "old vs. new" level difference? Bag goes out for it's debut next week doing some 5D shooting at a culinary education center. Quote Link to comment Share on other sites More sharing options...
Jack Norflus Posted October 25, 2012 Report Share Posted October 25, 2012 Are they all running the same software version? Quote Link to comment Share on other sites More sharing options...
mastermixaudiomedia Posted October 25, 2012 Author Report Share Posted October 25, 2012 #1953 is running 7-30H #3408 is running 7-81 #3409 is running 7-81 Did not upgrade #1953 past 7-30H due to the boundary warning in the release notes... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.