Michael P Clark Posted December 20, 2012 Report Share Posted December 20, 2012 I have a Petrol PS602 currently and am unhappy that it sits an inch and a half over the top of the bag. It seems that the larger bag has the same inner dimension. Is there another bag that anyone is using that fits the VR field better? Thanks Quote Link to comment Share on other sites More sharing options...
tong Posted December 20, 2012 Report Share Posted December 20, 2012 i believed the Pegz-3 extra large petrol or the AO-4 works. used to work with vrfield and 442 in it. the ao-4 will fit a 788/cl8 and vrfield but it will be a tight fit Quote Link to comment Share on other sites More sharing options...
Michael P Clark Posted December 20, 2012 Author Report Share Posted December 20, 2012 Was the Pegz-3 deeper than the PS603? Too bad it's discontinued, I can't find any measurements online. Anyone have theirs for measurement? Quote Link to comment Share on other sites More sharing options...
Nicole Hankerson Posted December 20, 2012 Report Share Posted December 20, 2012 I have 2 Portabrace bags if you want to use both of mines to test out. I have the Large and Extra large type audio organizer bags(can't remember exact model). Nicole Quote Link to comment Share on other sites More sharing options...
MT Groove Posted December 20, 2012 Report Share Posted December 20, 2012 I use the Petrol Pegz-3 to hold a VRField and a Fusion 12. Plenty of room for this setup. Quote Link to comment Share on other sites More sharing options...
dominiquegreffard Posted December 20, 2012 Report Share Posted December 20, 2012 Sorry for a little off topic but how much weight can a bag with a vr field and a 788t get? Would nt that be too heavy to wear? Quote Link to comment Share on other sites More sharing options...
Chris Durfy Posted December 20, 2012 Report Share Posted December 20, 2012 Mike, I have a PEGZ-3 that hasn't seen much action lately. Shout out of you want to check it out. Quote Link to comment Share on other sites More sharing options...
johnpaul215 Posted December 20, 2012 Report Share Posted December 20, 2012 Here's a PEGZ3 It's about 8" to the top of the cross brace, but there is a little more height to the strip that has the velcro on the other side. Hope this helps. here's a photo with measurements: Quote Link to comment Share on other sites More sharing options...
Michael P Clark Posted December 20, 2012 Author Report Share Posted December 20, 2012 Thanks John Paul. Looks like it'll fit nicely in that. Nicole, sorry, but I'm not a big Portabrace fan. Too bad they don't make the smaller PS602, or the Pegz-2 deeper. I can make the Pegz-3 work though. Quote Link to comment Share on other sites More sharing options...
TJW Posted December 23, 2012 Report Share Posted December 23, 2012 This is what I have around my VR Field that gives it some protection if taken off the cart. I made a couple of closed cell foam ends and stretched a piece of Cordura around the whole thing, securing it with Velcro. The VR Field lives on the cart but if I need more than a couple of wireless on the low loader, it is removable and there is some protection around the aluminium casing. Quote Link to comment Share on other sites More sharing options...
studiomprd Posted December 29, 2012 Report Share Posted December 29, 2012 " Would nt that be too heavy to wear? " that is up to you. Quote Link to comment Share on other sites More sharing options...
Todd Weaver Posted June 20, 2013 Report Share Posted June 20, 2013 " Would nt that be too heavy to wear? " that is up to you. Then, It depends.. Quote Link to comment Share on other sites More sharing options...
studiomprd Posted June 21, 2013 Report Share Posted June 21, 2013 guess so... Quote Link to comment Share on other sites More sharing options...
.png.279748a58a2b862b7aa5f3b84126e232.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.