mastermixaudiomedia Posted January 9, 2013 Report Share Posted January 9, 2013 Making a breakaway end for a RED ONE(2x TA3M send/TA5M return) for my Nomad. Thought it would be simple but as with most things RED: http://www.reduser.net/forum/showthread.php?55673-TA5-to-mini-jack Downloaded the manual... not a whole lot in there. Looks like there will be some poking around involved... Quote Link to comment Share on other sites More sharing options...
Eric Toline Posted January 9, 2013 Report Share Posted January 9, 2013 Making a breakaway end for a RED ONE(2x TA3M send/TA5M return) for my Nomad. Thought it would be simple but as with most things RED: http://www.reduser.n...A5-to-mini-jack Downloaded the manual... not a whole lot in there. Looks like there will be some poking around involved... Making a breakaway end for a RED ONE(2x TA3M send/TA5M return) for my Nomad. Thought it would be simple but as with most things RED: http://www.reduser.n...A5-to-mini-jack Downloaded the manual... not a whole lot in there. Looks like there will be some poking around involved... The Red One has TA3 females for audio input & the Nomad uses 1x 2 channel TA5 for output. From the Nomad TA5, pin 1 is ground for both channels, pin 2 is Ch 1 positive, pin 3 ch 1 negative, pin 4 ch 2 positive, pin 5 ch 2 negative. The 2 channel return TA 5 on the Nomad is an unbalanced feed and should be wired from the RED with the ground to pins 1, 3, 5 and the left positive to pin 2 and the right positive to pin 4. Eric Quote Link to comment Share on other sites More sharing options...
mastermixaudiomedia Posted January 9, 2013 Author Report Share Posted January 9, 2013 The Red One has TA3 females for audio input & the Nomad uses 1x 2 channel TA5 for output. From the Nomad TA5, pin 1 is ground for both channels, pin 2 is Ch 1 positive, pin 3 ch 1 negative, pin 4 ch 2 positive, pin 5 ch 2 negative. The 2 channel return TA 5 on the Nomad is an unbalanced feed and should be wired from the RED with the ground to pins 1, 3, 5 and the left positive to pin 2 and the right positive to pin 4. Eric Thanks for the info Eric, very similar to my breakaway ends for Panasonic AJ-SDC615's(except XLR5F). RED's manuals have no info whatsoever on the pinout, and the REDUSER forum just muddies the waters.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.