Marc Hoppe Posted March 24, 2013 Report Share Posted March 24, 2013 I need to update the firmware on an ERX2TC but I need the IFB 100 or QRX to do it. I am shooting in VA for the next few weeks and don't want to lose an ERX to make the return trip to NJ. Thanks. Marc Quote Link to comment Share on other sites More sharing options...
soundslikejustin Posted March 25, 2013 Report Share Posted March 25, 2013 I need to update the firmware on an ERX2TC but I need the IFB 100 or QRX to do it. I am shooting in VA for the next few weeks and don't want to lose an ERX to make the return trip to NJ. Thanks. Marc Acutally, you can't use the QRX - no card slot. You can use a normal Zaxcom Transmitter (TRX series), and possibly even a ZFR now that they can broadcast Zaxnet...but don't quote me on that bit Quote Link to comment Share on other sites More sharing options...
Jack Norflus Posted March 25, 2013 Report Share Posted March 25, 2013 You will need and IFB 100 or any TRX transmitter with a IFB board. The QRX or ZFR will not be able to update a ERX. Just curious why the sudden need to update the ERX? Quote Link to comment Share on other sites More sharing options...
Marc Hoppe Posted March 25, 2013 Author Report Share Posted March 25, 2013 My mistake, yes, the TRX series. I am trying to send TC as an audio channel to 2 5Ds in addition to my mix . I just bought a new ERX and the TC output is adjustable to a much lower level than the one with the older firmware. I haven't been able to attenuate each channel on the 5D independently, so either TC is too hot or my mix track is too low. Marc Quote Link to comment Share on other sites More sharing options...
Jack Norflus Posted March 25, 2013 Report Share Posted March 25, 2013 What version is your older ERX running? Because there hasn't been any firmware changes to TC levels in a while. Quote Link to comment Share on other sites More sharing options...
Marc Hoppe Posted March 25, 2013 Author Report Share Posted March 25, 2013 Not exactly certain as it not in front of me t the moment, but there is a difference. One erx steps all the way down to .005v I believe and the older one only goes to .031v. Thanks Jack. Marc Quote Link to comment Share on other sites More sharing options...
soundtrane Posted March 26, 2013 Report Share Posted March 26, 2013 but don't quote me on that bit >> hahhahah! Quote Link to comment Share on other sites More sharing options...
SirMixesAlot Posted March 26, 2013 Report Share Posted March 26, 2013 I'll be in the tri-cities area for a week starting Saturday. I'll pm you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.