rich Posted May 3, 2014 Report Share Posted May 3, 2014 what is your serial number? read this http://www.sekd.com/support/default.asp i had a similar issue with my 700 before i did the mod and all is good now. Quote Link to comment Share on other sites More sharing options...
rich Posted May 3, 2014 Report Share Posted May 3, 2014 also, if you plug the tx straight into the mic do you still have rfi? it may be getting picked up in your jumper cable or blimp cable - i had to cut the connection between the shell and pin 1 on my cinela mounts to get rid of the rfi there. although it does appear that you have tried your Neumann mics in your blimps - at least thats what i am assuming you mean when you write any way setup. Quote Link to comment Share on other sites More sharing options...
ChineseScissorhands Posted May 9, 2014 Report Share Posted May 9, 2014 also, if you plug the tx straight into the mic do you still have rfi? There wasn't RFI when I pluged the TRX742 straight into the CS3E or KM184. what is your serial number? read this http://www.sekd.com/support/default.asp i had a similar issue with my 700 before i did the mod and all is good now. I bought my two CS3e on Trewaudio.com 2013. SN is 3630 and 3631 Quote Link to comment Share on other sites More sharing options...
Shastapete Posted May 9, 2014 Report Share Posted May 9, 2014 There wasn't RFI when I pluged the TRX742 straight into the CS3E or KM184. Sounds like your cable is picking up your RFI, try the mod rich recommended, and/or emc connectors Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.