Jump to content

Takuro Kochi

Recommended Posts

" Isn't this quite expensive for a midi fader board? "

that is difficult to say...

Not if you have access to a currency converter.

The Midi port on the R-88 is actually a pretty good idea, depending on the protocol. It could allow access via dozens of low-cost and more expensive midi controllers. Motorized fader panel?

Link to comment
Share on other sites

 

Not if you have access to a currency converter.

The Midi port on the R-88 is actually a pretty good idea, depending on the protocol. It could allow access via dozens of low-cost and more expensive midi controllers. Motorized fader panel?

It's no motorized fader.

My friend made request, need mute and solo button.

 

 

 

I asked Question to Roland Staff, Now Roland dose not make a R-88's mixer.

Link to comment
Share on other sites

It's no motorized fader. My friend made request, need mute and solo button. I asked Question to Roland Staff, Now Roland dose not make a R-88's mixer.
No, I know it's not motorized. What I meant was if the R88 supports well-known Midi Control formats, such as HUI, then any Midi controller could be used. Even one with motorized faders. If it only supports proprietary formats, I'd question the use of a Midi port...
Link to comment
Share on other sites

  • 4 months later...
  • 2 months later...
  • 2 weeks later...

I am tempted to try Lemur for the R-88. I use the JL Cooper fader master pro and its actually pretty good but no solo. Seems the same with Lemur but at least I can throw my iphone in my bag and have a mini fader. Roland needs to give us something better than just faders and mutes. 

Link to comment
Share on other sites

I am tempted to try Lemur for the R-88. I use the JL Cooper fader master pro and its actually pretty good but no solo. Seems the same with Lemur but at least I can throw my iphone in my bag and have a mini fader. Roland needs to give us something better than just faders and mutes. 

Maybe It is possible. If you can use Lemur for the R-88, I help you.

Link to comment
Share on other sites

  • 1 month later...

Tried to connect my 1gen korg nanokontrol directly to r-88. Roland see it and I suppose it should work but I need to configure nanokontrol properly. I'm not good at midi. So I'll appreciate if anyone helps me find the right way of configuring.

There is a R-88 MIDI Implementation list available online. And my nanokontrol accept CC commands. Is it possible to connect these devices?

Link to comment
Share on other sites

  • 3 months later...
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...