Tim M Posted November 10, 2013 Report Share Posted November 10, 2013 Using a laird fiberglass omni antenna with a 1 watt amplifier using zaxnet. I get occasional bursts at almost any distance of the same sound of getting too close to the zaxnet antenna. Only happens on my lectro uh400 & hm. Called manufacturer and they had absolutely no idea. Using an RFVenue uhf antenna which sits around 3 feet from 2.4 ghz antenna. Nomad 10. Tried different things & it still happens...can't reproduce it. Any opinions? Thx! Tim Quote Link to comment Share on other sites More sharing options...
greg sextro Posted November 10, 2013 Report Share Posted November 10, 2013 What mic are you using? Quote Link to comment Share on other sites More sharing options...
Tim M Posted November 10, 2013 Author Report Share Posted November 10, 2013 Whoops forgot that part shows up on both my Schoeps cmc641-4 and my senny 416 & sanken cs3e Quote Link to comment Share on other sites More sharing options...
Zack Posted November 10, 2013 Report Share Posted November 10, 2013 Hummm, what mixer are you using, and is it sharing the same power source as the 2.4 amp/dc injector? Quote Link to comment Share on other sites More sharing options...
greg sextro Posted November 10, 2013 Report Share Posted November 10, 2013 When I had that problem, I think I discovered a fray in the internal cable of the boom pole was the culprit. Quote Link to comment Share on other sites More sharing options...
Tim M Posted November 10, 2013 Author Report Share Posted November 10, 2013 Yes, they are all on AC plugs on my cart right now Zack. It does get worse if I use the internal cable, but I never use it because it is too long of a cable run according to the manufacturer but even with both plugged directed into the microphone it sometimes still occurs...although much less than with a cable. Quote Link to comment Share on other sites More sharing options...
jerryray Posted November 11, 2013 Report Share Posted November 11, 2013 Using a laird fiberglass omni antenna with a 1 watt amplifier using zaxnet. I get occasional bursts at almost any distance of the same sound of getting too close to the zaxnet antenna. Only happens on my lectro uh400 & hm. Called manufacturer and they had absolutely no idea. Using an RFVenue uhf antenna which sits around 3 feet from 2.4 ghz antenna. Nomad 10. Tried different things & it still happens...can't reproduce it. Any opinions? Thx! Tim 1 watt, what band? Quote Link to comment Share on other sites More sharing options...
studiomprd Posted November 11, 2013 Report Share Posted November 11, 2013 " Tried different things & it still happens...can't reproduce it. Any opinions? " HUH? it still happens, or you can not reproduce it ?? " Using an RFVenue uhf antenna " not the problem... sounds like RF is spraying from somewhere, and/or otherwise getting into where it shouldn't. trial and error will be useful in narrowing down the culprit combinations... Quote Link to comment Share on other sites More sharing options...
Wandering Ear Posted November 13, 2013 Report Share Posted November 13, 2013 Tim, i haven't had your exact issue, but i do find the hm more susceptible to rf interference than other transmitters i have. My HM will pick up rf from my digital tx if within 2 feet or so. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.