Glen Deakin Posted February 4, 2014 Report Share Posted February 4, 2014 Anyone actually using this accessory? Is the Cable Stiff or soft and Flexible? I Want to use it for my MS Rig from my 8040/50 microphone and install a Binder connector to go to the Rycote Con-Box. Thanks Quote Link to comment Share on other sites More sharing options...
ncg Posted February 4, 2014 Report Share Posted February 4, 2014 Hi You might be better of just getting the rycote conn box with the MZL fitted, version 9 I think, here. http://www.rycote.com/products/accessoriesspares/connbox/ Best Quote Link to comment Share on other sites More sharing options...
Glen Deakin Posted February 4, 2014 Author Report Share Posted February 4, 2014 thanks but that wont work as i already have a conbox for my MS setup. it has detachable tails that connect with binder connectors. Cheers Quote Link to comment Share on other sites More sharing options...
daniel Posted February 4, 2014 Report Share Posted February 4, 2014 Rycote might still be able to provide you with the cable you need (MZL > binder) as the flying lead conn box was a recent change. If you want something good on a boom (soft and flexible) this may well be the best solution. dan. (i don't like soldering binders) Quote Link to comment Share on other sites More sharing options...
ncg Posted February 4, 2014 Report Share Posted February 4, 2014 Ah, sure. Let us know how it works out for you. Quote Link to comment Share on other sites More sharing options...
Glen Deakin Posted February 6, 2014 Author Report Share Posted February 6, 2014 will do. Thanks Quote Link to comment Share on other sites More sharing options...
Tom Visser Posted February 6, 2014 Report Share Posted February 6, 2014 I actually own one of these cables, I think I took it out of the box once to look at it, but don't recall it's flexibility or lack thereof. I'll check it out again when I get home next week. Quote Link to comment Share on other sites More sharing options...
Glen Deakin Posted February 6, 2014 Author Report Share Posted February 6, 2014 Please do thanks. I'm starting to think thats its going to be to thick to go into a binder connector. Correct me if I'm wrong. Its hard to tll from the picture and no shops hav it in stock in Toronto and dont want them to bring it in just to check and realize this wont work. Quote Link to comment Share on other sites More sharing options...
Ashok Vardhan Posted April 27, 2015 Report Share Posted April 27, 2015 Glen, I have two of these cables to work with my MKH8050's. Bought them intending to use them for car scenes to rig up plant microphones on the visors. Never put them to any use, since I never got to work on any car scenes. However, the cable is very flexible, soft and easy to bend. Which was one of the main reasons I invested in them. Quote Link to comment Share on other sites More sharing options...
Glen Deakin Posted April 27, 2015 Author Report Share Posted April 27, 2015 Thanks a lot. I kind of put the idea aside as I was going to use it with a MS setup in a rycote but have gone the cinela route. I had forgotten about this thread. Quote Link to comment Share on other sites More sharing options...
Richard Thomas Posted April 27, 2015 Report Share Posted April 27, 2015 Rycote will do MZL-Binder on request Quote Link to comment Share on other sites More sharing options...
Tom Visser Posted April 27, 2015 Report Share Posted April 27, 2015 Shit man, I forgot about the thread too, sorry for not responding and dropping the ball. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.