Jump to content

DPA 406x Powering circuits


soundmanjohn

Recommended Posts

As promised:

 

Two circuits: the first for unbalanced 9v operation, the second (which is what's inside the DPA 6001 adapter) for balanced 48v Phantom operation.

 

Best to check with a mic you don't mind losing if you're not sure about construction. Don't blame me if it all goes wrong!

 

Regards,

 

 

post-2730-0-02421800-1399370626_thumb.jp

post-2730-0-74755100-1399370641_thumb.jp

Link to comment
Share on other sites

  • 11 months later...
  • 3 years later...

Thanks to finding these schematics from Soundmanjon, I'm going to build a couple of circuits to power my ex-theatre DPA 4061s.. (both cut at the wire..)

A small question before I do so: My recorder can give 12V Tpower. Will adjusting the circuit above for T-Power and making an adapter for T-power instead, save me recorder battery? If T and phantom both have same current draw, I'd guess that would be correct.. ?

Link to comment
Share on other sites

  • 4 months later...
  • 3 years later...

Few years late but please on the 9 volt battery schematics The 10uF capacitor has no polarity shown.

Is it electrolytic and polarity is not showing or non polarized polypropylene ?

If anyone built this power supply please could you comment on my question.

Thanks

Stellar

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...