Jeff Wexler Posted July 11, 2014 Report Share Posted July 11, 2014 I am filling in on a movie next week and when I asked the DIT (who was my only contact) he said they are shooting Alexa XT at a true 24 fps. This always raises a flag and I replied that in the past there have been people who have specified 24 fps but what they really meant was 23.976 (you know the drill). Well, evidently I ruffled his feathers a bit, his reply to me: "If you run across a DIT who says 24fps and means 23.976, then he should turn in his wave form." I think my mistake was implying that it has been a DIT in the past that has made this mistake (which is not the case). So, I guess I set everything at 24 fps --- I actually have never done this before. Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted July 11, 2014 Report Share Posted July 11, 2014 And also maybe say to him that it's usually ok among professionals to ask technical questions before shoots (and so just chill some, ok?). philp Quote Link to comment Share on other sites More sharing options...
Tom Visser Posted July 12, 2014 Report Share Posted July 12, 2014 I think we need to bring back mathematical precision back to this whole framerate issue. It should be written 24.000 fps (in my opinion). It is true that if someone says 24fps, they mean 24.000, while if someone says 24p, that generally infers 23.976 fps. The problem is that most non-technical people don't understand this distinction in seemingly interchangeable nomenclature. I noticed that on the new GH4, since it allows you to set system frequency (NTSC, PAL, or cine) that there are going to be a whole lot of amateur filmmakers shooting at "true 24fps" because they think it is better. Quote Link to comment Share on other sites More sharing options...
Jeff Wexler Posted July 12, 2014 Author Report Share Posted July 12, 2014 So, I get a message from Scott Farr: "FYI - the Alexa (including all flavors) will only record sync sound at 23.976" What now? Quote Link to comment Share on other sites More sharing options...
old school Posted July 12, 2014 Report Share Posted July 12, 2014 Scott's correct afaik. The camera does shoot a true 24 though. Send the camera a good mix, if it doesn't record sound ask the DIT to explain. If you want to CYA, roll 2 recorders at the 2 different frame rates is the best I can come up with. CrewC Quote Link to comment Share on other sites More sharing options...
Jeff Wexler Posted July 12, 2014 Author Report Share Posted July 12, 2014 Not feeding the camera any audio --- so I guess I didn't read Scott's post properly (I don't need the Alexa to record any of the sound, this is pure double system). I mis-understood "will only record sync sound" to mean that if not set to 23.976 it cannot be synced to my recorded sound. Silly, I know, but I'm just going to go with my settings (for jamming purposes) of a straight 24.0. Quote Link to comment Share on other sites More sharing options...
ao Posted July 12, 2014 Report Share Posted July 12, 2014 your topic had no mention of the sampling rate. on 24fps shows that I work on, the sampling rate is 48.048: http://www.trewaudio.com/audioflow/48048-khz/ hopefully the dit can confirm this for you or can give you the name of the post supervisor Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted July 12, 2014 Report Share Posted July 12, 2014 I don't see a way to set the Alexa camera audio SR to anything other than 48k--is there one? A workflow that used 48.048 SR for audio and 24 fps video seems like it is headed for a 23.976 post and a pull up later on, maybe @ the DCP stage? philp Quote Link to comment Share on other sites More sharing options...
John Blankenship Posted July 12, 2014 Report Share Posted July 12, 2014 A feature I worked on last summer was shot on an Alexa at actual 24fps. Sound was recorded at 48kHz. I was thinking that I sent a scratch track to the camera but I've slept since then so can't be sure about that. I recall we did jam the camera. One thing to check on the Alexa is that the sensor rate and frame rate coincide. Quote Link to comment Share on other sites More sharing options...
rich Posted July 12, 2014 Report Share Posted July 12, 2014 i have mixed a couple of films with the Alexa where the camera and myself were recording at 24fps. though this is in the land of PAL where things are less confusing. havent yet received any phone calls screaming at me that they cant get sound and picture to sync up. Quote Link to comment Share on other sites More sharing options...
Chris Woodcock Posted July 12, 2014 Report Share Posted July 12, 2014 I just finished an Alexa shoot running at 24fps Sent from my Nexus 5 using Tapatalk Quote Link to comment Share on other sites More sharing options...
VASI Posted July 12, 2014 Report Share Posted July 12, 2014 48.048 is something different. Don't use it (record it) without to cover your ass from post production. When I say "cover your ass"; I mean to get an official letter (with signature) from post production. Quote Link to comment Share on other sites More sharing options...
Marc Wielage Posted July 12, 2014 Report Share Posted July 12, 2014 Yes, I have seen a handful of productions shooting at 24.00fps with true 24-frame timecode, though most are 23.98. Sounds to me like the DIT was being very snippy to Jeff, which is unfair since this was a totally legit question. Somebody should have this information written down so that it's an etched-in-stone memo with everything fully spelled out. In truth, a lot of different workflows can work. All it takes is for every department to agree on it. I think generally editorial makes the request, but there may also be a VP of Post-Production at the studio who weighs in on the final decision. Quote Link to comment Share on other sites More sharing options...
RPSharman Posted July 12, 2014 Report Share Posted July 12, 2014 The Alexa doesn't need 48048 in that situation. WB still does this work flow. Camera at true 24fps. Sound at 24/48048. Pull down to 23.976 camera and sound in editorial timeline and through post. Seems crazy to me. Quote Link to comment Share on other sites More sharing options...
pindrop Posted July 12, 2014 Report Share Posted July 12, 2014 Is it that, if it's a movie for the cinema then 24.000 fps and if for TV then 23.976 might suit the workflow better, as 24.000 fps would need to be made 23.976 fps for USA TV somewhere along the line and it would save that conversion, if it's destined for TV from the start? The many films made for the cinema (24.000fps) that are regularly shown on TV, at 23.976 no-one notices the conversion? 23.976 FPS = 24×1000÷1001. Here's a pretty detailed explanation for 48048 - http://www.trewaudio.com/audioflow/48048-khz/ Quote Link to comment Share on other sites More sharing options...
Ze Frias Posted July 12, 2014 Report Share Posted July 12, 2014 If you are filling in, perhaps contact the mixer who was previously working the show to confirm sync settings for sound? I understand he or she may not be your point of contact for the show, but it may be worth trying to reach the person anyway. Let us know how everything ends up working out. Quote Link to comment Share on other sites More sharing options...
ao Posted July 12, 2014 Report Share Posted July 12, 2014 I don't see a way to set the Alexa camera audio SR to anything other than 48k--is there one? A workflow that used 48.048 SR for audio and 24 fps video seems like it is headed for a 23.976 post and a pull up later on, maybe @ the DCP stage? philp apologies for lack of clarity. sampling rate was for the sound recorder, when shooting double system. I have never had to feed an alexa, so I don't know the audio settings of the camera at all. as rob sharman mentions, I have used this workflow for WB shows, when filling in. I routinely get a call and email from the mixer I am filling in for, or doing second unit for, with all the specs spelled out. ao Quote Link to comment Share on other sites More sharing options...
chrisnewton Posted July 12, 2014 Report Share Posted July 12, 2014 Here's a question: do digital cinema projectors in theatres work at 24fps or 23.98? Quote Link to comment Share on other sites More sharing options...
Angelo Waldron Posted July 12, 2014 Report Share Posted July 12, 2014 Here's a question: do digital cinema projectors in theatres work at 24fps or 23.98? The projectors will run anything...23.9,24,25,29.9 etc. When I look at the server that runs the Digital Cinema Package, it identifies the media as 24psf 12bit 444 JPeg2000 250Mbps 48k PCM audio for a 2048x1080 flat picture, 2048x 858 for scope. (2K) Progressive Segmented Frame..same as HDCamSR. Simulates a 24fps film projector with a 2-bladed shutter. But I'll have to go back and look again, as my memory is constantly changing, along with all this new stuff that comes and goes.... a re-inventing of the wheel...... Doesn't make any difference what you shoot at, master house will conform. Quote Link to comment Share on other sites More sharing options...
Philip Perkins Posted July 12, 2014 Report Share Posted July 12, 2014 Some DCP houses make a deal out of many projectors out there in theatres being ONLY able to play 24 fps DCPs, while others can play several frame rates (29.97 even). So the DCP makers always seem to lean on the filmmakers to deliver 24fps projects. philp Quote Link to comment Share on other sites More sharing options...
Jason Yun Posted July 13, 2014 Report Share Posted July 13, 2014 Second what Rich and Chris said, Alexa and 788T at 24FPS. No issues. Quote Link to comment Share on other sites More sharing options...
Olle Sjostrom Posted July 13, 2014 Report Share Posted July 13, 2014 You're right Philip. In Sweden we almost always shoot at 25, and it's all good, until we want to go DCP. We can't shoot at 24 or 23.976 because many festivals and other formats which are more widely used can do 25. No biggie, but still. I think the projectors are being updated with new framerates, at least I think so.. Heard people talking about it Quote Link to comment Share on other sites More sharing options...
Angelo Waldron Posted July 13, 2014 Report Share Posted July 13, 2014 The projectors will run anything...23.9,24,25,29.9 etc. Quote Link to comment Share on other sites More sharing options...
studiomprd Posted July 13, 2014 Report Share Posted July 13, 2014 Jose finally said: " contact the mixer who was previously working the show to confirm sync settings for sound? " also checking in with post, as you typically do. ao: " I routinely get a call and email from the mixer I am filling in for, or doing second unit for, with all the specs spelled out. " maybe there is something we don't know about this "filling in", but when doing so under any circumstances, if the production expects things to run smoothly, they need to provide complete, proper specifications; if there was an issue, then the issues need to be resolved, and workflow verified. and, BTW, I would agree that the DIT was a bit brusque, and will probably be surprised when s/he learns of JW's level of experience and competence. Quote Link to comment Share on other sites More sharing options...
Olle Sjostrom Posted July 13, 2014 Report Share Posted July 13, 2014 Then we must've fallen way behind over here. There's no way to persuade anyone to make a 25 fps DCP in Sweden. Meh Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.