Jump to content

Recommended Posts

Posted

The Duopack Li Ion housing for the SRb receivers is going to final QC this week and will be on the shelf the first of December 2014. This enables the SRb dual channel receiver to be used with cameras that do not have a power output available. Here is the product sheet:

http://www.lectrosonics.com/US/Multicouplers-Adapters/product/482-duopack.html#data-sheet

 

Best Regards,
Larry Fisher
Lectrosonics

 

post-125-0-34614900-1416867077_thumb.jpg

Posted

Will this fit in a 411 BEC box?

It is a little larger than a 411 so no.

LEF

brilliant! So it's *approximately* 411 sized, and can use existing mounting solutions (but you only need one of them). Very nice! 

Perzactly.

LEF

Posted

Great idea! Extra points for the protection of the cabling in the frame. That was the last missing thing preventing me from switching to db25 connectors in my bag.

Trew audio did me up a really nice metal db25 female connector to 2 xlr and power for bag use. Super heavy duty. Not sure the brand name of the connector but its solid. Not the worlds lightest connector either.
Posted

many camera owner operators do not want any type of type or glue or glue residue on their cameras. Any one else notice this? Who could blame them..

Some guys like to look at their dick and admire it, others like to use it and get residue on it.

Posted

There are some mounting parts. I will post them tomorrow. We've also sent samples to some of the usual suspects that make thingies for mounting receivers to cameras and battery packs. There will be accessories.

Best,

Larry F

Lectro

Posted

There are some mounting parts. I will post them tomorrow. We've also sent samples to some of the usual suspects that make thingies for mounting receivers to cameras and battery packs. There will be accessories.

Best,

Larry F

Lectro

We are sending a dummy DUOPACK to BEC Group so they can make a holder.

 

We are also looking at making a sleeve similar to the SRSLEEVE:

http://www.lectrosonics.com/US/Receivers-Portable-Accessories/product/304-srsleeve.html

 

The sleeve hardware will be similar to this:

http://www.lectrosonics.com/US/Receivers-Portable-Accessories/product/302-srhardware.html

 

The sides of the DUOPACK are flush to the chassis so Velcro can be used directly between the DUOPACK and the camera or whatever.  To make the unit shorter, the standoff for the cables at the bottom of the unit is detachable with 4 screws. The screw holes are deliberately deep so the "unused" screws can be stored in the screw holes. So, between Velcro, BEC Group and a sleeve from us, we should be covered. 

Other suggestions welcomed.

Best Regards,

Larry Fisher

Lectrosonics

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...