Wittle Posted December 3, 2014 Report Share Posted December 3, 2014 Hello all, I've been using the Fusion 12 for a while now and suddenly I am hearing a high pitched tone on inputs 9-12. I hear the tone regardless of whether or not the Fusion is connected to the MIx 12. I hear it on PFL with the fader up or down and also when the fader is up nomally. I also hear it with all inputs disconnected but only on 9-12. It sounds like a 240 cycle hum or higher but it's hard to say for sure. Anyone else heard of this problem? Quote Link to comment Share on other sites More sharing options...
Marc Wielage Posted December 3, 2014 Report Share Posted December 3, 2014 Yes, I have heard this problem on the Deva with the Mix-12 when the connecting ribbon cable is acting up. Replace that cable, do a complete reset, and see if the problem goes away. Quote Link to comment Share on other sites More sharing options...
studiomprd Posted December 3, 2014 Report Share Posted December 3, 2014 Hi, and welcome Whittle: " suddenly I am hearing a high pitched tone on inputs 9-12." CRAP happens, sometimes suddenly... " Anyone else heard of this problem? " typically... and you really ought to contact either Zaxcom, or your local dealer... Quote Link to comment Share on other sites More sharing options...
Wittle Posted December 3, 2014 Author Report Share Posted December 3, 2014 Thank you, Marc. I have disconnected the mix 12 cable already and the noise is there even when using the Fusion 12 as a stand alone recorder. I have called Zaxcom and they said they would look into it and call me back but I have not heard back from them yet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.