Eric Lau Posted June 26, 2015 Report Share Posted June 26, 2015 anyone try with Fuze Ti slate with Zaxcom ERX2TCD? Success (use same TC cable): Zaxcom Nomad 12 (TC in/out) (connect in one second). No Success (use same TC cable): Denecke GR-2 (sometimes jam 2 to 3 times until success, the hour digi fail, need connect in 7-10 second). Zaxcom ERX2TCD (fail) Quote Link to comment Share on other sites More sharing options...
michaelmoote Posted June 26, 2015 Report Share Posted June 26, 2015 Great to hear Michael:-) I do have to note that it does not automatically detect the frame rate, if you're powering up the slate with a timecode signal already connected it will use and display the last frame rate setting before syncing. That is just as a reminder of the last used frame rate, the slate saves the last frame rate used in the internal flash memory. I tried to code for automatic frame rate detection but just could not get it to reliably differentiate between 23.98 and 24.00 or 29.97 and 30.00. Good to know. I was only switching from 23.97 to 29.97 and I remember it detecting and jamming to whatever I set the master clock to. I'll have to play with it again when I get home. Quote Link to comment Share on other sites More sharing options...
George Tsai Posted August 25, 2015 Author Report Share Posted August 25, 2015 (edited) I made a couple extra slates during the short production run and they are available on the site:-) Bundled http://fuzeti.com/compact-bundle-239.html or just the generator display by itself http://fuzeti.com/fdcpp.html :-) The enclosure and final assembly will take approximately two weeks from the time of order to ship:-) Edited August 25, 2015 by piman Quote Link to comment Share on other sites More sharing options...
bralleput Posted August 25, 2015 Report Share Posted August 25, 2015 George,on your site the photo of the slate has '43383279' as 'timecode'.....what is this??Keep up the good work!!David C. Quote Link to comment Share on other sites More sharing options...
George Tsai Posted August 26, 2015 Author Report Share Posted August 26, 2015 George,on your site the photo of the slate has '43383279' as 'timecode'.....what is this??Keep up the good work!!David C. PI :-P Tho I just realized I accidentally repeated '4' on the last image from the previous one:-P Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.