Jump to content

Building a ta5 to xlr to power lav mic


PelicanSound

Recommended Posts

OST say however that the adapter isn't guaranteed to work with any lavs other than their own. Buy at own risk.

 

I have confirmed it will work with Trams and Countrymans if they have the same TA5 wiring. OST was willing to modify their adapters for me so that they work correctly with Servo wiring. I think they're actually superior to the real Tram phantom-powered adapters.

Link to comment
Share on other sites

  • 1 month later...

Yes, it's straight forward wiring. If you buy a mic with the xlr adapter you can cut that off and put TA connectors on between them. The benefit of the Eumel is it's much smaller which I think is worth it. The benefit of the xlr adapter that comes with your mic is that it will output the precise DC voltage your lav wants to see, but at the expense of one more connector which could potentially fail.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...