bendybones Posted March 9, 2015 Report Share Posted March 9, 2015 I'm looking to replicate the RA 3.5mm found on the Senny HD 25 1-II cans. Although I would need a non-moulded variety. This is to replace the moulded straight jack which the HD26s came with. It still needs to have locking threads on the outside, so that my 1/4" adapter will be interchangeable between all my cans. It needs to be right angled for space and because the cans will live on the left side of the Nomad bag and plug in to the right side of the Nomad. Anyone know a part number or likely source? Quote Link to comment Share on other sites More sharing options...
Eric Toline Posted March 9, 2015 Report Share Posted March 9, 2015 Would this be what you want? Quote Link to comment Share on other sites More sharing options...
bendybones Posted March 9, 2015 Author Report Share Posted March 9, 2015 they look like the straight variety, rather than the right angle variety, but thanks Quote Link to comment Share on other sites More sharing options...
Eric Toline Posted March 9, 2015 Report Share Posted March 9, 2015 Never seen a RA variety of the Sony style HP 3.5mm plug. The ones in the picture are not the correct thread for the 1/4" adapter in any event. Quote Link to comment Share on other sites More sharing options...
jason porter Posted March 9, 2015 Report Share Posted March 9, 2015 I bet www.locationsoundcables.com could hook you up. Quote Link to comment Share on other sites More sharing options...
bendybones Posted March 12, 2015 Author Report Share Posted March 12, 2015 Thanks folks. I'll check with LSC and report back if i find anything. Quote Link to comment Share on other sites More sharing options...
CraigF Posted March 21, 2015 Report Share Posted March 21, 2015 I have never seen a replacment rt.ang. threaded 3.5mm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.