fiore Posted April 4, 2015 Report Share Posted April 4, 2015 The title says it all. My meters are working fine, audio comes through my headphones for both channels, the output from a breakaway cable to camera works fine as well, the recorder just wont register the right channel, has anyone else ever had an issue like this? Quote Link to comment Share on other sites More sharing options...
thebrengun Posted April 4, 2015 Report Share Posted April 4, 2015 Check your AES A source Quote Link to comment Share on other sites More sharing options...
fiore Posted April 4, 2015 Author Report Share Posted April 4, 2015 it's set on Left and right Quote Link to comment Share on other sites More sharing options...
Carlos Maeda Posted April 4, 2015 Report Share Posted April 4, 2015 Interesting, I had the exact opposite problem with mine. Would record and output to headphones just fine, but would not output the L channel in the XLR, TA3, or 10-pin outs. Had to be sent back to the mothership. Quote Link to comment Share on other sites More sharing options...
Matt Mayer Posted April 4, 2015 Report Share Posted April 4, 2015 When you set your Headphones to "REC Source" what do you hear? Quote Link to comment Share on other sites More sharing options...
fiore Posted April 4, 2015 Author Report Share Posted April 4, 2015 When you set your Headphones to "REC Source" what do you hear? i hear stereo left and right Quote Link to comment Share on other sites More sharing options...
fiore Posted April 4, 2015 Author Report Share Posted April 4, 2015 Interesting, I had the exact opposite problem with mine. Would record and output to headphones just fine, but would not output the L channel in the XLR, TA3, or 10-pin outs. Had to be sent back to the mothership. I sent SD an email this afternoon, i know it's a long weekend for some so hopefully i'll get an answer by Tuesday Quote Link to comment Share on other sites More sharing options...
Matt Mayer Posted April 4, 2015 Report Share Posted April 4, 2015 Hmmm, check your Timecode mode in menu -14, make sure it isn't set to "Replace Right" • Off (-30) • Stamp File (-24) • Replace Left (-22) • Replace Right (-20) • Stamp file Auto Record (-18) • Replace Left Auto Record (-16) • Replace Right Auto Record (-14) Quote Link to comment Share on other sites More sharing options...
fiore Posted April 4, 2015 Author Report Share Posted April 4, 2015 Hmmm, check your Timecode mode in menu -14, make sure it isn't set to "Replace Right" This was the exact issue, much appreciated Quote Link to comment Share on other sites More sharing options...
al mcguire Posted April 4, 2015 Report Share Posted April 4, 2015 holiday weekend, obscure issue, solved in less than 3 hours pretty amazing community here Quote Link to comment Share on other sites More sharing options...
chrismedr Posted April 4, 2015 Report Share Posted April 4, 2015 well, as far as i know matt works for SD... so, i'd say pretty amazing tech support (that's not implying that the community here isn't amazing chris Quote Link to comment Share on other sites More sharing options...
Matt Mayer Posted April 4, 2015 Report Share Posted April 4, 2015 well, as far as i know matt works for SD... so, i'd say pretty amazing tech support (that's not implying that the community here isn't amazing chris Not a full-time employee, but a long-time consultant. They like me because I work nights and weekends -- typical freelancer. Quote Link to comment Share on other sites More sharing options...
Jeff Wexler Posted April 4, 2015 Report Share Posted April 4, 2015 Whether employed full time, part time or not at all, doesn't really matter whether it is "official support", Matt has been helpful on so many occasions to so many, and he really knows his stuff when it comes to sorting out things with Sound Devices products. Quote Link to comment Share on other sites More sharing options...
edward chick Posted April 4, 2015 Report Share Posted April 4, 2015 Matt rocks. Quote Link to comment Share on other sites More sharing options...
soundtrane Posted April 5, 2015 Report Share Posted April 5, 2015 +1 Matt! Quote Link to comment Share on other sites More sharing options...
fiore Posted April 5, 2015 Author Report Share Posted April 5, 2015 Not a full-time employee, but a long-time consultant. They like me because I work nights and weekends -- typical freelancer. either way you were a great help, and thanks to the rest of you as well; awesome community here. I've been lurking for a while but i guess it took a problem for me to actually make a post. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.